Metallization on FDM Processed Parts Using Electroless Procedure
نویسندگان
چکیده
منابع مشابه
Metallization on FDM Parts Using the Chemical Deposition Technique
Metallization of ABS (acrylonitrile-butadiene-styrene) parts has been studied on flat part surfaces. These parts are fabricated on an FDM (fused deposition modeling machine) using the layer-wise deposition principle using ABS as a part material. Electroless copper deposition on ABS parts was performed using two different surface preparation processes, namely ABS parts prepared using chromic aci...
متن کاملSelective Metallization of Cured Su-8 Microstructures Using Electroless Plating Method
In this talk, we report a research work on fabrication and metallization of high aspect ratio polymer microstructures fabricated using UV lithography of SU-8 on silicon substrate. Electroless plating of metal film on both the top and sidewall surfaces of microstructures were achieved while the silicon substrate was not plated. The primary chemical mechanisms and possible applications were also ...
متن کاملCopper electroless plating in weakly alkaline electrolytes using DMAB as a reducing agent for metallization on polymer films
Copper electroless plating at low pH (7–9) using dimethylamine borane complex as a reducing agent is studied electrochemically by linear sweep voltammetry, cyclic voltammetry and chronopotentiometry in full electrolytes. We find that the mixed potential theory is not applicable to the described system. We show that both the working potential and the rate-controlling mechanism are dependent on t...
متن کاملMechanical and Thermal Properties of Fdm Parts Manufactured with Polyamide
Fused Deposition Modeling (FDM) is an Additive Manufacturing (AM) technology which is used for prototypes, single-part production and also small batch productions. For use as a final product, it is important that the parts have good mechanical properties, high dimensional accuracy and smooth surfaces. The knowledge of the mechanical properties is very important for the design engineer when it c...
متن کاملElectroless Nickel Deposition for Front Side Metallization of Silicon Solar Cells
In this work, nickel thin films were deposited on texture silicon by electroless plated deposition. The electroless-deposited Ni layers were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy dispersive x-ray spectroscopy (EDS), X-ray diffraction analysis (XRD), and sheet resistance measurement. The results indicate that the dominant phase was Ni...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Procedia Materials Science
سال: 2014
ISSN: 2211-8128
DOI: 10.1016/j.mspro.2014.07.193