Metallurgy and Structure of Casting Alloy Cu-30Zn Cast in Sand Moulds
نویسندگان
چکیده
منابع مشابه
Cast Iron Metallurgy
Cast iron (CI) is one of the oldest materials in commercial use. It has excellent compressive strength and is commonly used for structures that require this property, as well as for water and sewer lines. This article explains CI metallurgy and why the understanding of this metallurgy is key to understanding other ferrous materials and alloys. The composition of cast iron (CI) varies significan...
متن کاملA Study for Analyzing Effects of Design Parameters in the Sand Casting Process of Aluminum Alloy
The use of aluminum alloys are of significant use in industry. Studying of design parameters of such products is important as not much work has been done for optimizing it. The generic formulation involves the flow, velocity, continuity fluid dynamics and shape related issues. The time for filling the mould and shape factor also play major role in performance of the casting process. In this pap...
متن کاملSolidification in Copper Continuously Cast in Graphite Moulds
A mathematical model of heat transfer in continuous casting copper slabs capable of producing experimental data has been constructed and validated against experimental data provided by the management of Copper Refineries Ltd., Townsville plant in Australia. It has been used to predict the effects of major casting variables; metal temperature, casting speed and metal conductivity. The results ca...
متن کاملGray cast-iron water pipe metallurgy
The results of a metallographic study of grey cast iron water pipes are reported. These pipes had been installed between 1885 and 1973 in eight different water systems. Each pipe had been extracted during scheduled maintenance or failure repairs to provide data for a larger study to produce a methodology for determining the residual life of grey cast iron pipes. This metallographic study was co...
متن کاملEffects of Solidification Time on Mechanical Properties and Wear Behaviour of Sand Cast Aluminium Alloy
An investigation was carried out to understand the effects of solidification time of the cylindrical specimen on hardness, wear rate and the coefficient of friction of Aluminium alloy (LM4). The commercially available LM4 Aluminium alloy was melted in a crucible furnace under argon atmosphere. The molten metal was poured into sand moulds having dissimilar size holes. The cast rods were tested f...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Manufacturing Technology
سال: 2016
ISSN: 1213-2489,1213-2489
DOI: 10.21062/ujep/x.2016/a/1213-2489/mt/16/5/1014