METHOD OF IONIC MIXING FOR SILICIDE LAYER FORMATION
نویسندگان
چکیده
منابع مشابه
simulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water
abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...
Optimizing the Formation of Nickel Silicide
A review of the formation processes for nickel silicide is given to assess the limitations of using the silicide for sub-65 nanometer technologies. Various aspects attributed to the NiSi formation process are described and addressed by using a two-step process sequence for annealing. The focus of this study was to develop a process sequence with three principal steps to achieve low resistivity ...
متن کاملMathematical model for a radioactive marker in silicide formation
A mathematical model is constructed to interpret the profiles of radioactive Si tracers in a computer simulation proposed by R. Pretorius and A. P. Botha [Thin Solid Films 91, 99 ( 1982)]. This model assumes that only Si moves in the silicide, that the Si moves interstitially and convectively, and that the moving Si can exchange sites with the stationary Si in the silicide lattice. An analytica...
متن کاملVertical mixing layer development
A new generation of current and wave testing tanks is required to simulate more realistic sea conditions at larger scales. One means of producing a current is by using groups of impellers arranged around the perimeter of a circular tank. Each propeller produces a single flow velocity which may be different to its neighbours. These differences can lead to a stepped or curved plan view velocity p...
متن کاملFormation of a Low Ohmic Contact Nickel Silicide Layer on Textured Silicon Wafers Using Electroless Nickel Plating
This paper presents a low cost process for fabrication of high efficiency silicon-based solar cells from front side ARC patterning through contact line metallization. This process utilizes a screen printable etch resist to define the contact pattern and a wet etching solution to remove the exposed ARC layer. The metallization stack for the contact line pattern consists of a nickel silicide ohmi...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Physical and Chemical Aspects of the Study of Clusters, Nanostructures and Nanomaterials
سال: 2020
ISSN: 2226-4442,2658-4360
DOI: 10.26456/pcascnn/2020.12.868