Micro and nano indentation studies on Zr60Cu10Al15Ni15 bulk metallic glass
نویسندگان
چکیده
منابع مشابه
Hot embossing of micro-lens array on bulk metallic glass
Hot embossing of micro-lens array on bulk metallic glass C.T. Pan a,∗, T.T. Wu a, M.F. Chen a, Y.C. Chang b, C.J. Lee b, J.C. Huang b a Department of Mechanical and Electro-Mechanical Engineering, and Center for Nanoscience & Nanotechnology, National Sun Yat-Sen University, Kaoshiung 804, Taiwan, ROC b Institute of Materials Science & Engineering, Center for Nanoscience and Nanotechnology, Nati...
متن کاملDuctile bulk metallic glass.
We report on experimental evidence of pronounced global plasticity measured in monolithic Pt57.5Cu14.7Ni5.3P22.5 bulk metallic glass under both bending and unconfined compression loading conditions. A plastic strain of 20% is measured, never before seen in metallic glasses. Also, permanent deformation and a strain exceeding 3% before failure is observed during bending of 4 mm thick samples. To ...
متن کاملStudy of the Mechanical Behaviour of a Zr-Based Metallic Glass Rod Using Micro- and Nano-Indentation
The mechanical properties of a Zr55Cu30Al10Ni5 metallic glass rod are investigated by Vickers microhardness and depth-sensing nanoindentation. The alloy exhibits a relatively large hardness which decreases when increasing the maximum applied load. Serrated flow is also observed during nanoindentation. Both effects are related to deformationinduced mechanical softening.
متن کاملBulk metallic glass matrix composites
Composites with a bulk metallic glass matrix were synthesized and characterized. This was made possible by the recent development of bulk metallic glasses that exhibit high resistance to crystallization in the undercooled liquid state. In this letter, experimental methods for processing metallic glass composites are introduced. Three different bulk metallic glass forming alloys were used as the...
متن کاملStudy of Mechanical Deformation in Bulk Metallic Glass through Instrumented Indentation
Instrumented sharp indentation experiments at the nanoand micro-length scales were carried out in an attempt to quantify the deformation characteristics of Vitreloy 1 bulk metallic glass. The experiments were accompanied by detailed three-dimensional finite element simulations of instrumented indentation to formulate an overall constitutive response. By matching the experimentally observed con...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials & Design (1980-2015)
سال: 2015
ISSN: 0261-3069
DOI: 10.1016/j.matdes.2014.09.017