Micro-beam plasma polishing of ground alloy steel surfaces
نویسندگان
چکیده
منابع مشابه
Low Temperature Plasma Nitriding of Inner Surfaces in Stainless Steel Mini-/Micro-Pipes and Nozzles
Metallic miniature products have been highlighted as mini-/micro-structural components working as a precise mechanism, in dispensing systems, and in medical operations. In particular, the essential mechanical parts such as pipes and nozzles have strength and hardness sufficient for ejecting viscous liquids, solders, and particles. A low-temperature plasma nitriding process was proposed as a sur...
متن کاملTopographical Anisotropy and Wetting of Ground Stainless Steel Surfaces
Microscopic and physico-chemical methods were used for a comprehensive surface characterization of different mechanically modified stainless steel surfaces. The surfaces were analyzed using high-resolution confocal microscopy, resulting in detailed information about the topographic properties. In addition, static water contact angle measurements were carried out to characterize the surface hete...
متن کاملMicro-Shaping of Nanopatterned Surfaces by Electron Beam Irradiation
We show that planar nanopatterned thin films on standard polycarbonate (PC) compact discs (CD) can be micro-shaped in a non-contact manner via direct e-beam exposure. The shape of the film can be controlled by proper selection of the e-beam parameters. As an example of application, we demonstrate a two-dimensional (2D) array of micro-lenses/reservoirs conformally covered by an Al 2D nanohole ar...
متن کاملAbrasive Flow Polishing of Micro Bores
This report shares the feasibility study results of abrasive flow polishing of microbores of size φ500 μm or smaller and 25∼50 in aspect ratio for both metal and ceramic materials. A polishing device was designed and built up so as to create enough turbulence for facilitating the polishing at the inner walls of the micro-bore. Polishing of micro-bores on 3 materials: S45C, SS304 and Zr2O3 of le...
متن کاملINVESTIGATION NITRIDE LAYERS AND PROPERTIES SURFACES ON PULSED PLASMA NITRIDED HOT WORKING STEEL AISI H13
Nitriding is a surface treatment technique used to introduce nitrogen into metallic materials to improve their surface hardness, mechanical properties, wear resistance and corrosion resistance. In this research, the effects of plasma nitriding parameters including frequency and duty cycle were investigated on samples with different grooves dimensions. Steel blocks prepared from DIN1.2344 hot wo...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Procedia Manufacturing
سال: 2018
ISSN: 2351-9789
DOI: 10.1016/j.promfg.2018.07.268