Micro-Bulges Investigation on Laser Modified Tool Steel Surface
نویسندگان
چکیده
منابع مشابه
Laser Grooving of Surface Cracks on Hot Work Tool Steel
Repair welding (RW) with wire cladding is a common procedure to extend the in-service life of heavily loaded tool parts for die and mould industries 1-5 . The main advantages of repair welding are short downtime and cost efficiency compared to production of new tool part. Repair welding in general lowers the tool cost in the final part and enables higher added value to the die casting and injec...
متن کاملOptimization of process parameters for pulsed laser milling of micro-channels on AISI H13 tool steel
This paper focuses on understanding the influence of laser milling process parameters on the final geometrical and surface quality of micro-channel features fabricated on AISI H13 steel. Optimal selection of process parameters is highly critical for successful material removal and high dimensional and surface quality for micro-sized die/mold applications. A set of designed experiments is carrie...
متن کاملExperimental Investigation of Tool Steel M2 Coating on Mild Steel by Friction Surfacing
Friction surfacing is an emerging surface engineering technology, developed on the basic principle of friction welding, for depositing wear and corrosion resistant metallic coatings. In the present work coating of tool steel M2 were made on mild steel by friction surfacing by using 2 factorial designs with 3 factors at two levels for each. Process parameters developed a satisfactory deposition ...
متن کاملInvestigation of Surface integrity of AISI D3 tool steel After EDM
-AISI D3 tool steel is a high-carbon, highchromium, oil-hardening tool steel that is characterized by a relatively high attainable hardness and numerous, large, chromium-rich alloy carbides in the microstructure. These carbides provide good resistance to wear from sliding contact with other metals and abrasive materials. Typical applications for D3 tool steel include Blanking, stamping, and col...
متن کاملParametric Investigation of Diode and CO2 Laser in Direct Metal Deposition of H13 Tool Steel on Copper Substrate
In the present investigation, H13 tool steel has been deposited on copper alloy substrate using both CO2 and diode laser. A detailed parametric analysis has been carried out in order to find out optimum processing zone for coating defect free H13 tool steel on copper alloy substrate. Followed by parametric optimization, the microstructure and microhardness of the deposited clads have been evalu...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: MATEC Web of Conferences
سال: 2017
ISSN: 2261-236X
DOI: 10.1051/matecconf/20179502007