Micro-composite fibres by electrospinning

Nanometre diameter fibres of polymer, produced by electrospinning

Electrospinning uses electrical forces to produce polymer fibres with nanometre-scale diameters. Electrospinning occurs when the electrical forces at the surface of a polymer solution or melt overcome the surface tension and cause an electrically charged jet to be ejected. When the jet dries or solidifies, an electrically charged fibre remains. This charged fibre can be directed or accelerated ...

Micro helical polymeric structures produced by variable voltage direct electrospinning

Direct near field electrospinning is used to produce very long helical polystyrene microfibers in water. The pitch length of helices can be controlled by changing the applied voltage, allowing to produce both micro springs and microchannels. Using a novel high frequency variable voltage electrospinning method we found the helix formation speed and compared the experimental buckling frequency to...

Composite Material and Optical Fibres

Electrospinning carbon nanotube polymer composite nanofibers

The unique and exceptional physical properties of carbon nanotubes have inspired their use as a filler within a polymeric matrix to produce carbon nanotube polymer composites with enhanced mechanical, thermal and electrical properties. A powerful method of synthesising nanofibers comprising these polymer composites is electrospinning, which utilises an applied electric stress to draw out a thin...

Short Communication Emulsion electrospinning: Composite fibers from drop breakup during electrospinning

*Correspo Engineer USA. E-mail: v We evaluate the feasibility of electrospinning oil-in-water type emulsions. The emulsions had an aqueous solution of polyethylene oxide (PEO) as the continuous phase, and either mineral oil or a polystyrene (PS) in toluene solution as the drop phase. The Taylor cones and electrified liquid jets were stable even when the emulsion drops were as large as a few-ten...