Micro-CT-based identification of double porosity in fired clay ceramics
نویسندگان
چکیده
منابع مشابه
Moisture expansion and mass gain in fired clay ceramics
We report the first measurements of mass gain and expansive strain in clay ceramics immediately following firing. The results show that both mass gain and expansive strain follow a well defined two-stage process, each stage of which is linear with (time)1/4, with a transition from the first to the second stage commencing at t ∼ 1.5 h. The first stage mass gain and strain rates are ∼3.5 times gr...
متن کاملMicro-CT Detection and Characterization of Porosity in Luting Cements.
PURPOSE To evaluate porosity volume and localization in luting cements under fixed dental prostheses after cementation using micro-computed tomography (CT). MATERIALS AND METHODS Seventy-seven sound molars were circumferentially prepared to receive all-ceramic crowns, and IPS e.max ceramic copings were fabricated according to the manufacturer's instructions. For this study, different dental l...
متن کاملGradient-Hierarchic-Aligned Porosity SiOC Ceramics
This work describes a simple technique to produce porous ceramics with aligned porosity having very high permeability and specific surface area. SiOC-based compositions were processed from blends of three types of preceramic polymer and a catalyst, followed by curing and pyrolysis. The heating applied from the bottom of molds promoted the nucleation, expansion and rising of gas bubbles, and the...
متن کاملInvestigation on the Role of Porosity in the Structure of Historical Ceramics
Structural characterization of historical materials, especially clay-based compositions, as well as technical and archaeological aspects, has a significant role in the diagnosis of the deterioration process. One of the most important parameters in the structure of clay-base ceramics (such as pottery, brick, and tile ware) is porosity that includes all open and closed pores in the matrix of poro...
متن کاملQuantitative Study of Porosity and Pore Features in Moldavites by Means of X-ray Micro-CT
X-ray micro-computer aided tomography (μ-CT), together with optical microscopy and imaging, have been applied to the study of six moldavite samples. These techniques enabled a complete characterization to be made of the textural features of both Muong Nong-type and common splashform moldavites. A detailed study of the size and distribution of pores or bubbles confirmed the marked variability in...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Materials Science
سال: 2018
ISSN: 0022-2461,1573-4803
DOI: 10.1007/s10853-018-2281-9