Micro-fabrication of Functional Gels
نویسندگان
چکیده
منابع مشابه
Three-dimensional Micro Fabrication of Active Micro Devices Using Soft Functional Materials by Ho
Active materials that can adapt to dynamic environment have attracted growing attention in various fields of science and engineering because they hold great potential in development of autonomous and multifunctional devices and systems. Hydrogels, which swell and contract in response to a wide range of external stimuli, have been studied extensively as one of the most promising functional mater...
متن کاملMicro-layered-photolithography for Micro- Fabrication and Micro-molding
A novel process based on the principle of layered photolithography has been proposed and tested for making three-dimensional micro-structures. An experimental setup was designed and built for doing experiments on this micro-fabrication process. An ultraviolet (UV) excimer laser at the wavelength of 248 nm was used as the light source and a single piece of photo-mask carrying a series of two dim...
متن کاملCombining ATRP and FRP Gels: Soft Gluing of Polymeric Materials for the Fabrication of Stackable Gels
Stackable gels comprised of layers of dissimilar polymers were synthesized by combining conventional free radical polymerization (FRP) and atom transfer radical polymerization (ATRP) using two approaches: (i) polymerization of a pre-gel solution containing a monomer and cross-linker introduced on top of a previously prepared gel, and (ii) simultaneous polymerization of two immiscible pre-gel so...
متن کاملFabrication of Polymeric Micro needle Array by Micromachining & Micro molding
Microneedles are expected to have greater demand in biomedical applications like sensing, electroporation & drug delivery in the future and there is need for development of fabrication process which is simple, economical and productive. Present work discusses about fabrication of PDMS (polydimethylsiloxane) micro needle array electrode for bio-potential signal measurement like EEG by micromachi...
متن کاملNozzle Fabrication for Micro Propulsion of a Micro Satellite
⎯ To enable formation flying of micro satellites, small sized propulsion systems are required. Our research focuses on the miniaturization of a feeding and thruster system by means of micro system technology (MST). Three fabrication methods have been investigated to make a conical converging-diverging nozzle. These methods are reactive ion etching, femtosecond laser machining (FLM) and a combin...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Kobunshi
سال: 2004
ISSN: 0454-1138,2185-9825
DOI: 10.1295/kobunshi.53.340