Micro-hole drilling by tightly focused vector beams
نویسندگان
چکیده
منابع مشابه
Surface plasmon interference excited by tightly focused laser beams.
We show that interfering surface plasmon polaritons can be excited with a focused laser beam at normal incidence to a plane metal film. No protrusions or holes are needed in this excitation scheme. Depending on the axial position of the focus, the intensity distribution on the metal surface is either dominated by interferences between counterpropagating plasmons or by a two-lobe pattern charact...
متن کاملMicro-hole drilling with femtosecond fiber laser
In this paper, micro-hole drilling in ambient air is presented using fs fiber laser (750 fs & 1030 nm). Micro holes were fabricated in both transparent (glasses) and non-transparent materials (metals and tissues). Hole shape and morphology was characterized and evaluated with optical microscope and scanning electron microscopy (SEM). Debris-free micro holes with good roundness and no thermal da...
متن کاملComputation of tightly-focused laser beams in the FDTD method.
We demonstrate how a tightly-focused coherent TEMmn laser beam can be computed in the finite-difference time-domain (FDTD) method. The electromagnetic field around the focus is decomposed into a plane-wave spectrum, and approximated by a finite number of plane waves injected into the FDTD grid using the total-field/scattered-field (TF/SF) method. We provide an error analysis, and guidelines for...
متن کاملMicro-hole drilling and cutting using femtosecond fiber laser
Micro-hole drilling and cutting in ambient air are presented by using a femtosecond fiber laser. At first, the micro-hole drilling was investigated in both transparent (glasses) and nontransparent (metals and tissues) materials. The shape and morphology of the holes were characterized and evaluated with optical and scanning electron microscopy. Debris-free micro-holes with good roundness and no...
متن کاملInvestigation of Aspect Ratio of Hole Drilling from Micro to Nanoscale via Focused Ion Beam Fine Milling
Holes with different sizes from microscale to nanoscale were directly fabricated by focused ion beam (FIB) milling in this paper. Maximum aspect ratio of the fabricated holes can be 5:1 for the hole with large size with pure FIB milling, 10:1 for gas assistant etching, and 1:1 for the hole with size below 100 nm. A phenomenon of volume swell at the boundary of the hole was observed. The reason ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Optics Letters
سال: 2018
ISSN: 0146-9592,1539-4794
DOI: 10.1364/ol.43.001542