Micro Joining Package (Design)
نویسندگان
چکیده
منابع مشابه
Active Gripper for Hot Melt Joining of Micro Components
Precision assembly of hybrid micro systems requires not only a high precision handling and adjusting of the parts but also a highly accurate and fast bonding technique. In this field adhesive technology is one of the major joining techniques. At the Collaboration Research Center 516, a batch process based on a joining technique using hot melt adhesives was developed. This technique allows the c...
متن کاملConcepts for Hybrid Micro Assembly Using Hot Melt Joining
Nowadays, the production of 3D MEMS and MOEMS is carried out by using hybrid integration of single components, for which batch production is normally preferred. In this field, adhesive technology is one of the major joining techniques. At the Collaboration Research Center 516, a batch process based on a joining technique which uses hot melt adhesives was developed. This technique allows the coa...
متن کاملDesign of the ump Package
where the constants γ and C are determined by Eθ{φ(X,α, θ)} = α. The description of the analogous lower-tailed test is the same except that all inequalities are reversed. The constant C is clearly any (1−α)-th quantile of the distribution of T (X) for the parameter value θ. If C is not an atom of this distribution, then the test is effectively not randomized and the value of γ is irrelevant. Ot...
متن کاملEnergy-Harvesting System-in-Package (SiP) Micro-System
As micro-scale devices, such as wireless micro-sensors and non-invasive biomedical implants, continue to shrink and incorporate more functions, energy becomes scarce, thereby shortening operation life. Furthermore, the limited volume space available constrains the stored energy available in state-of-the-art micro-battery technologies, such as thin-film lithium ion (Li Ion). For long-lasting lif...
متن کاملImplant Surface Micro-Design
The application of implants for dental and orthopedic surgery has increased rapidly within the past few decades. In craniomaxillofacial surgery, different implant systems have been applied, for example, for dental and bone replacement or osteosynthesis plates and screws. These implants may be made of pure titanium or a titanium alloy, usually titanium-aluminumvanadium (Ti-6Al-4V). The surface c...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: JOURNAL OF THE JAPAN WELDING SOCIETY
سال: 2011
ISSN: 0021-4787,1883-7204
DOI: 10.2207/jjws.80.618