Micro-lateral extrusion of Zr55Cu30Al10Ni5bulk metallic glass under low-frequency vibration loading
نویسندگان
چکیده
منابع مشابه
Performance of Air Foam Flooding under Low Frequency Vibration
Foam injection is widely applied in amounts of fields to drilling, production, and formation protection. Sometimes, the application result is disappointing, which is caused by the failure of bubble generation in foam flooding. Therefore, it is necessary to seek ways for improving the performance of foam injection. An increased disturbance to the stratum, like the vibration caused by a seismic o...
متن کاملInfluence of ultrasonic vibration on micro-extrusion.
Micro-forming is a miniaturization technology with great potential for high productivity. Some technical challenges, however, need to be addressed before micro-forming becomes a commercially viable manufacturing process. These challenges include severe tribological conditions, difficulty in achieving desired tolerances, and short tool-life due to inability of available die materials to withstan...
متن کاملperformance of air foam flooding under low frequency vibration
foam injection is widely applied in amounts of fields to drilling, production, and formation protection. sometimes, the application result is disappointing, which is caused by the failure of bubble generation in foam flooding. therefore, it is necessary to seek ways for improving the performance of foam injection. an increased disturbance to the stratum, like the vibration caused by a seismic o...
متن کاملPrognostics implementation of electronics under vibration loading
In this paper, a methodology is developed for monitoring, recording, and analyzing the life-cycle vibration loads for remaining-life prognostics of electronics. The responses of printed circuit boards to vibration loading in terms of bending curvature are monitored using strain gauges. An analytical model calibrated by finite element analysis is developed to calculate the strain at interconnect...
متن کاملSpall strength of a zirconium-based bulk metallic glass under shock-induced compression-and-shear loading
We present results of a series of plate-impact experiments conducted to understand spall threshold in a zirconium-based bulk metallic glass (BMG), Zr41.25Ti13.75Ni10Cu12.5Be22.5, following normal shock-induced compression and combined compression-and-shear loading. The experiments were conducted using a 82.5 mm bore single-stage gas-gun. A multibeam VALYN VISAR was used to measure the particle–...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: MATEC Web of Conferences
سال: 2015
ISSN: 2261-236X
DOI: 10.1051/matecconf/20152109007