Micro-structured packed bed reactors for solar photocatalysis: impacts of packing size and material on light harnessing

Fermentative hydrogen production in packed-bed and packing-free upflow reactors.

Fermentative hydrogen production from a synthetic wastewater containing 10 g/L of sucrose was studied in two upflow reactors at 26 degrees C for 400 days. One reactor was filled with packing rings (RP) and the other was packing free (RF). The effect of hydraulic retention time (HRT) from 2 h to 24 h was investigated. Results showed that, under steady state, the hydrogen production rate signific...

Simulated Performance of Packed Bed Solar Energy Storage System having Storage Material Elements of Large Size - Part I

Packed bed or rock bed is very commonly known thermal energy storage component for solar air heaters. The major concern for design of packed bed energy storage system is to maximize the heat transfer with minimum pressure drop or pumping power. Under the given operating conditions, system parameters could affect heat transfer and pressure drop in the bed considerably. An attempt has been made t...

Simulated Performance of Packed Bed Solar Energy Storage System having Storage Material Elements of Large Size - Part II

In the present paper an attempt has been made to report simulated performance of a packed bed solar energy storage system. Performance of the system having large size storgae material elements has been evaluated as a function of system and operating parameters. In the present part of this paper, system performance w.r.t. temperature distribution in the bed, thermal energy stored and available e...

Experimental Investigations on Packed Bed Solar Air Heater

Sizing of a Packed Bed Storage for Solar Air Heating Systems (TECHNICAL NOTE)

Packed bed units generally, represent the most suitable storage units for air heating solar systems. In these systems the storage unit receives the heat from the collector during the collection period and discharges the heat to the building at the retrieval process. A method for sizing of packedbed storage in an air heating system is represented. The design is based on the K-S curves, which hav...