Micro-Welding of Electronic Devices
نویسندگان
چکیده
منابع مشابه
Mved (micro Vacuum Electronic Devices) 193-nm Lithography 3d Micro/nanomanipulation with Force Spectroscopy
Amicromanipulation system is a robotic device which is used to physically interact with a sample under a microscope, where a level of precision of movement is necessary that cannot be achieved by the unaided human hand It is well known that pick-and-place is very important for 3-D microstructure fabrication since it is an indispensable step in the bottom-up building process. The main difficulty...
متن کاملElectronic devices.
Machined Horn Array Micromachined Horn Array DC/IF-board Magnet Schematic of an array structure including a micromachined and machined horn array, the device wafer, and the dc and IF connection board. (b) I-V curves of seven SIS junctions in the array. (Courtesy of Q. Hu)
متن کاملSelection of Arc Welding Parameters of Micro Alloyed Hsla Steel
Like all steel types, HSLA requires a definition and strict practical adherence to welding parameters in order to achieve the required weld quality. Different sources offer a varying array of welding parameters. Although their hierarchical importance can be disputed, their principal definition and practical adherence are prerequisites for the quality of welded joints 1,2 . The analysis of earli...
متن کاملApplication of YAG Pulsed Laser Micro-Welding in MEMS Packaging
This paper reports a new packaging method for a wide range of MEMS for application on both the wafer and device scale. Titanium is used as the packaging material in this work and both silicon and titanium MEMS devices are integrated on to a titanium substrate. A Nd:YAG pulsed laser is used to micro-weld the titanium cap to the substrate. A three-dimensional time dependent model of heat flow dur...
متن کاملLaser transmission welding of transparent plastics parts in micro technology
Most welding processes for plastics do not meet the special demands of micro technology. Laser transmission welding, however, features distinctive advantages like low mechanical and thermal load of the joining parts. Hence it is particularly suitable for the welding of micro plastics parts. Certain optical properties of the components to be welded are needed though. While one of the welding par...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Welding Society
سال: 1969
ISSN: 0021-4787,1883-7204
DOI: 10.2207/qjjws1943.38.10_1080