Microalloying effects of Mo versus Cr in HSLA steels with ultrafine-grained ferrite microstructures
نویسندگان
چکیده
منابع مشابه
Microalloying Ultrafine Grained Al Alloys with Enhanced Ductility
Bulk ultrafine grained (UFG)/nanocrystal metals possess exceptional strength but normally poor ductility and thermal stability, which hinder their practical applications especially in high-temperature environments. Through microalloying strategy that enables the control of grains and precipitations in nanostructured regime, here we design and successfully produce a highly microstructure-stable ...
متن کاملMicrostructures of Pearlite and Martensite Transformed from Ultrafine-Grained Austenite Fabricated through Cyclic Heat Treatment in Medium Carbon Steels
This study investigated the microstructures of pearlite and martensite transformed from ultrafine-grained austenite in 0.45C steel and Vadded 0.45C steel. The mean prior austenite grain sizes were refined to be 4.5 μm in the 0.45C specimen and 2.4 μm in the V-added 0.45C specimen through cyclic heat treatment of austenitizing and water quenching, i.e., repetition of martensite § austenite trans...
متن کاملHeat affected zone microstructures and their influence on toughness in two microalloyed HSLA steels
Microstructures and Charpy impact properties have been examined in two microalloyed steels following heat treatments to simulate weld heat affected zone (HAZ) structures over a range of heat input conditions, characterised by the cooling time from 800 to 500 !C (Dt8/5). The base materials were low carbon structural steel plates microalloyed with vanadium and nitrogen (V–N) and niobium (Nb), res...
متن کاملAustenite Stability during Nanoindentation of Ultrafine and Coarse Grained AISI 304L Stainless Steels
In the present study, the effect of grain size on the austenite stability was studied by nanoindentation tests in a 304L stainless steel. Thermomechanical processing based on cold rolling and annealing was used to produce two different types of austenite: ultrafine grained (UFG) austenite with the average grain size of 0.65 μm and coarse grained (CG) austenite with the average grain size of 12 ...
متن کاملCombination of dynamic transformation and dynamic recrystallization for realizing ultrafine-grained steels with superior mechanical properties
Dynamic recrystallization (DRX) is an important grain refinement mechanism to fabricate steels with high strength and high ductility (toughness). The conventional DRX mechanism has reached the limitation of refining grains to several microns even though employing high-strain deformation. Here we show a DRX phenomenon occurring in the dynamically transformed (DT) ferrite, by which the required s...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials & Design
سال: 2020
ISSN: 0264-1275
DOI: 10.1016/j.matdes.2019.108278