Microlens Array Fabrication by Using a Microshaper
نویسندگان
چکیده
منابع مشابه
Fabrication of conical microneedles array using photolithography
Background and Aim: Microneedle technology has led to huge changes in the field of drug delivery medicine. Using microneedles, the drug can be injected locally, painlessly, and in very low and controlled doses with high precision. Local drug delivery through the skin with microneedles has many advantages over other methods of drug delivery. In this method, the drug does not enter the gastrointe...
متن کاملConcave Microlens Array Mold Fabrication in Photoresist Using UV Proximity Printing
This paper presents a simple and effective method to fabricate a polydimethyl-siloxane (PDMS) microlens array with a high fill factor, which utilizes the UV proximity printing and photoresist replication methods. The concave microlens array mold was made using a printing gap in lithography process, which utilizes optical diffraction of UV light to deflect away from the aperture edges and produc...
متن کاملPhase Shift Mask Fabrication by Laser Microlens Array Lithography for Periodic Nanostructures Patterning
Laser microlens array (MLA) lithography was used to fabricate arbitrary periodic array of patterns on photoresist. Reactive ion etching (RIE) was then utilized to etch and transfer the patterns down to the fused silica substrate. By controlling the etching process, the etched surface was 180° out of phase with the unetched surface. Subsequently, the patterns were used as a phase shift mask for ...
متن کاملFlat polymeric microlens array
A polymer-based flat microlens array is demonstrated. Within each pixel of the array, the polymer presents a circular central-symmetric inhomogeneous orientation. Pixel with such a structure behaves a lens-like character. A suitable amount of liquid crystal mixed in the polymer host can improve not only the lens flexibility but also the lens performance. Moreover, the polymer-based microlens ar...
متن کاملEvaluation of a Microlens Array using Optical Interferometry
In this paper, a technique based on the use of optical interferometry is employed to evaluate the surface geometry and refractive index profile of a graded-index planar microlens array. The experimental setup consists of sodium light and He-Ne laser sources which are incorporated into a microscopy system. The two light sources can be utilized alternately for surface geometry and refractive inde...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Micromachines
سال: 2021
ISSN: 2072-666X
DOI: 10.3390/mi12030244