Micromechanical modeling of damage and load transfer in particulate composites with partially debonded interface
نویسندگان
چکیده
منابع مشابه
Engineered Cementitious Composites (ecc) – Tailored Composites through Micromechanical Modeling
This article provides a brief overview of several classes of fiber reinforced cement based composites and suggests future directions in FRC development. Special focus is placed on micromechanics based design methodology of strain-hardening cement based composites. As example, a particular engineered cementitious composite newly developed at the ACE-MRL at the University of Michigan is described...
متن کاملModeling damage in polymeric composites
We postulate that dominant damage modes in a fiber-reinforced laminated composite are fiber breakage, matrix cracking, fiber/ matrix debonding, and delamination/sliding. The first three damage modes are represented by internal variables with their development governed by constitutive relations. The delamination/sliding failure mode is presumed to initiate at a point on an interface between two ...
متن کاملMicromechanical modeling of fiber reinforced pervious concrete composites
Pervious concrete is widely used in today’s construction industry, e.g.. parking lots, airport runways, etc. However, the durability and strength of the porous concrete remains a challenge, as the binding material proportion is low and the use of fi ne aggregates is nearly 0. Increasing the compressive load, the failure appears fi rst in the weak concrete zone induced by the random distribution...
متن کاملInfluence of Partially Debonded Interface on Elasticity of Syntactic Foam: A Numerical Study
The effect of interfacial bonding of glass hollow microspheres and a polymer matrix on the elastic properties of syntactic foam was investigated using representative volume element (RVE) models, including partially debonded interfaces. Finite element analysis, with models having different debonding geometries, was performed to numerically estimate the elastic behavior of the models. The models ...
متن کاملMicromechanical Analysis of Random Composites
Micromechanical Analysis of Random Composites by Michal Šejnoha and Jan Zeman Effective elastic properties are found for a fibrous graphite-epoxy composite system with fibers randomly distributed within a transverse plane section of the composite aggregate. Two different approaches are examined. The first approach assumes a well defined geometry of the fiber arrangement and specific boundary co...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Composite Structures
سال: 2016
ISSN: 0263-8223
DOI: 10.1016/j.compstruct.2016.06.075