Micrometer-sized Bismuth Tubes Prepared by Combining Electrospinning Technique and Electroless Plating Method
نویسندگان
چکیده
منابع مشابه
Preparation of Pd composite membrane via organic-inorganic activation method in electroless plating technique
A palladium composite membrane was prepared via electroless plating technique using organic-inorganic method during activation process. The ceramic support surface was modified by two TiO2-boehmite and one γ-alumina layers to avoid Pd penetration in support pores. Thin and defect-free Pd composite membrane was obtained by creating a relative smoothness on the ceramic support and using Pd nanopa...
متن کاملAdsorption Properties of Nickel-based Magnetic Activated Carbon Prepared by Pd-free Electroless Plating
Nickel-based magnetic activated carbon was synthesized from coconut shell activated carbon by electroless plating with palladium-free activation. The effect of plating solution volume on metallic ratio and adsorption capacity were evaluated. The effect of metallic ratio on specific area, pore volume, and magnetic properties were investigated. The morphologies of activated carbon before and afte...
متن کاملElectroless Nickel Plating with Hypophosphite
In the previous chapter, the components of electroless nickel plating baths were discussed from the viewpoint of the function each performs in the bath, with little attention paid to their effect on the plating process. The metal and the electron source (the reducing agent) are consumed in the electroless plating reaction and so their concentrations in the bath are continuously decreasing. Ther...
متن کاملElectroless Nickel Plating: Bath Control
In this paper, bath control is proposed for the electroless nickel plating through holes board process. The main parameters of the product (board) – thickness of the plating film and phosphorous content – are stabilized at constant levels using optimal tracking control. The set point for control is calculated from the model in dependence on the current state of the process. The pH-index and nic...
متن کاملPreparation of the Copper Coatings on Fe Powder by Electroless Plating Technique
The electroless coating technique is one of the elegant methods available for the production of protective coatings on surface. Our study has been aimed at the conditions of the electroless deposition of copper coating onto the iron powder particles from sulphate electrolyte. The course of the electroless process depends on the composition and pH of the electrolyte as well as on the size and co...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of The Surface Finishing Society of Japan
سال: 2012
ISSN: 0915-1869,1884-3409
DOI: 10.4139/sfj.63.191