Microstrip Patch Antenna Miniaturization Using Magneto-Dielectric Substrates for Electromagnetic Energy Harvesting
نویسندگان
چکیده
A mathematical modelling, and a derivation of the main parameters Magneto â Dielectric materials (substrate) their effect on microstrip patch antenna design is shown. The shown to miniaturize size enhance bandwidth when used in antenna. progression foundational modelling starts with laying out concepts ferrimagnetic terms permeability permittivity, components miniaturization. First, ground free elliptical (GFDSEPA) simulated for miniaturization purposes at 900MHz cellular band. reduction almost 50% as well enhancement (100%) achieved by utilizing GFDSEPA. More employing magneto dielectric structure; this case commercially available Rogers MAGTREX 555 substrate used. Other performance show comparable results between based only one magnetoâdielectric substrate. comparison work other literature application energy harvesting, using rectifier circuit, Layout scenarios harvester are proposed. proposed layout ensures practicality assures correlation simulation experimental results.
منابع مشابه
Miniaturization of Microstrip Patch Antenna Using CSRR
In this paper a novel structure of metamaterial is proposed in order to miniaturize a rectangular microstrip patch antenna. The metamaterial is composed of two nested split octagons which are located on a 10 mmx10 mm Rogers RT/duroid 5880 with 0.7874 mm thickness and dielectric constant of 2.2. A 3X5 array of such metamaterials is placed on the patch antenna substrate. By using this metamateria...
متن کاملMiniaturization of rectangular microstrip patch antenna using topology optimized metamaterial
A topology optimization method is proposed in this study to miniaturize a Rectangular Microstrip Patch Antenna (RMPA) operates at a frequency of 2.4 GHz using Metamaterials (MTMs) composed of complementary resonator. The metamaterial is placed in an intermediate layer between the patch and the ground, binary pixelation approach is used to build the structure of the complementary resonator and i...
متن کاملMicrostrip antenna miniaturization using partial dielectric material filling
In this paper we study microstrip antenna miniaturization using partial filling of the antenna volume with dielectric materials. An analytical expression is derived for the quality factor of an antenna loaded with a combination of two different materials. This expression can be used to optimize the filling pattern for the design that most efficiently retains the impedance bandwidth after size r...
متن کاملDesign of Single Pin Shorted Three-dielectric-layered Substrates Rectangular Patch Microstrip Antenna for Communication Systems
In this paper, we have simulated a single-pin-shorted microstrip line fed three-dielectric-layer (with different permittivity and thickness) rectangular patch microstrip antenna for all those communication systems whose limited antenna size is premium. Low permittivity hard foam has been used as one substrate to achieve wide bandwidth. The simulation of this proposed antenna has been performed ...
متن کاملMicrostrip Patch Antenna Miniaturization by using Split Ring Resonators Which Are in-Plane for WLAN Application
Combining the antenna miniaturization and bandwidth preservation could increase the challenges of integrating the smaller, thinner, low profile, high efficient antennas into equipment for different applications. In this paper, a novel Microstrip Patch Antenna with reduced size for WLAN application is proposed. Introducing in-plane Split Ring Resonators (SRRs) in the vicinity of the patch, and f...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of communications software and systems
سال: 2021
ISSN: ['1845-6421', '1846-6079']
DOI: https://doi.org/10.24138/jcomss-2020-0005