Microstructural Analysis of 3D-Printed Alloy 718
نویسندگان
چکیده
منابع مشابه
Effect of Microstructural Variations on the Tensile and Fracture Toughness Properties of Alloy 718 Welds
The effect of microstructural variations on the tensile and fracture toughness properties of Alloy 718 welds is reviewed. The microstructural parameters surveyed include heat treatment, longterm thermal aging and neutron irradiation. The two heat treatments that were characterized include the conventional heat treatment, per ASTM B637, and a modified heat treatment designed to improve the tough...
متن کاملEffect of Microstructural Variations on the Fracture Toughness of Wrought Alloy 718
The effect of microstructural variations on the fracture toughness of Alloy 718 was reviewed. The metallurgical parameters surveyed in this paper included heat treatment, heat-to-heat variations, product-form variations, neutron irradiation and long-term thermal aging. Key microstructural features and operative fracture mechanisms were related to macroscopic fracture toughness properties.
متن کاملCharacterization of the Dendritic Microstructure of Investment Cast Alloy 718
The as-cast alloy 718 shows a multiphasic structure which consists of dendrites, carbides and Laves phases. The amount, size, shape, and dispersion of these phases affect the properties and the processing which follows, This structure was characterized by measurements of volume fraction, size, dispersion, and shape factor of carbide and Laves phases. Secondary arm spacing and Vickers hardness w...
متن کاملModeling and Simulation of Alloy 718 Microstructure and Mechanical Properties
Alloy 718 is a unique superalloy that has been in use for a number of years. It also has the distinction to be utilized throughout the aerospace and general industrial communities. The applications for this material are often very unique and require tailoring of the microstructure and subsequently the mechanical properties to meet these specific needs. To support optimization of Alloy 718 mecha...
متن کاملMicrostructural Evaluation of Ti-6AL-4V Alloy during Hot Deformation
Among the titanium alloys, Ti-6Al-4V is the most widely used. In the present work, the uniaxial hot compressive behavior of Ti-6Al-4V has been investigated under constant strain rates. A series of dilatometery experiments were carried out to determine the transformation temperatures at different cooling rates. Specimens were homogenized at 1050 °C for 10 minutes followed by fast cooling to dif...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Microscopy and Microanalysis
سال: 2015
ISSN: 1431-9276,1435-8115
DOI: 10.1017/s1431927615003116