MICROSTRUCTURAL AND MECHANICAL PROPERTIES AL 6061 PROCESSED BY COLD ROLLING AND AGING
نویسندگان
چکیده
منابع مشابه
Hot and Cold Tensile Behavior of Al 6061 Produced by Equal Channel Angular Pressing and Subsequent Cold Rolling
The full annealing AA6061 aluminum alloy was subjected to severe plastic deformationvia the combination of equal channel angular pressing (ECAP) and cold rolling (CR) in order torefine its microstructure and to improve its mechanical properties. According to the results of hotand cold tensile tests, the combination of ECAP and CR significantly affected the final strengthand ductility of studied...
متن کاملINVESTIGATION OF MICROSTRUCTURAL AND MECHANICAL PROPERTIES OF 7075 AL ALLOYPREPARED BY SIMA METHOD
The microstructure and mechanical properties of 7075 wrought aluminum alloy produced by strain induced melt activation (SIMA) route were investigated.Also liquid volume fraction measurement was studied by three procedures. Remelting process was carried out in the range of 560 to 610 °C for 20 min holding. The microstructure in the semi-solid state consists of fine spherical solid grains surroun...
متن کاملhot and cold tensile behavior of al 6061 produced by equal channel angular pressing and subsequent cold rolling
the full annealing aa6061 aluminum alloy was subjected to severe plastic deformationvia the combination of equal channel angular pressing (ecap) and cold rolling (cr) in order torefine its microstructure and to improve its mechanical properties. according to the results of hotand cold tensile tests, the combination of ecap and cr significantly affected the final strengthand ductility of studied...
متن کاملdetermination of some physical and mechanical properties red bean
چکیده: در این تحقیق، برخی خواص فیزیکی و مکانیکی لوبیا قرمز به-صورت تابعی از محتوی رطوبت بررسی شد. نتایج نشان داد که رطوبت بر خواص فیزیکی لوبیا قرمز شامل طول، عرض، ضخامت، قطر متوسط هندسی، قطر متوسط حسابی، سطح تصویر شده، حجم، چگالی توده، تخلخل، وزن هزار دانه و زاویه ی استقرار استاتیکی در سطح احتمال 1 درصد اثر معنی داری دارد. به طوری که با افزایش رطوبت از 54/7 به 12 درصد بر پایه خشک طول، عرض، ضخام...
15 صفحه اولSize Effect on Mechanical Properties and Texture of Pure Copper Foil by Cold Rolling
To study the size effect on the properties of copper, tensile tests were performed with pure copper foil (thickness range from 25 μm to 300 μm) by cold rolling. A pronounced size effect was observed at a thickness of 76 μm. The results showed that ultimate strength increased as sample thickness decreased from 300 μm to 100 μm, however, this was decreased as the thickness changed from 76 μm to 2...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: VANOS Journal of Mechanical Engineering Education
سال: 2018
ISSN: 2528-2700,2528-2611
DOI: 10.30870/vanos.v3i1.3686