Microstructural Characteristics of Cement-Based Materials Fabricated Using Multi-Mode Fiber Laser
نویسندگان
چکیده
منابع مشابه
Experimental Investigation of Multi-mode Fiber Laser Cutting of Cement Mortar
This study successfully applied multi-mode laser cutting with the variation of the laser cutting speed to cement mortar for the first time. The effects of the amount of silica sand in the cement mortar on laser cutting are tested and analyzed. The kerf width and penetration depth of the specimens after laser cutting are investigated. As the laser cutting speed increases, the penetration depth d...
متن کاملSwitchable multi-wavelength Tm-doped mode-locked fiber laser.
We propose and demonstrate for the first time a switchable tri-wavelength Tm-doped ultra-fast fiber laser based on nonlinear polarization evolution (NPE) technique. The NPE effect induces wavelength-dependent loss in the cavity that changes the homogeneous broadening of the effective gain to become inhomogeneous. This inhomogeneous effective gain spectral profile enables the multi-wavelength mo...
متن کاملMode-locked fiber laser gyroscope.
We propose and demonstrate a novel fiber-optic gyroscope in the form of a mode-locked laser consisting of a laser cavity formed by a planar mirror at one end, a gain medium, and a Sagnac interferometer at the other end. The Sagnac interferometer serves as a reflector as well as a rotation-sensing element. The output of the gyroscope is a series of short optical pulses. The separation of two set...
متن کاملImproved Sectional Image Analysis Technique for Evaluating Fiber Orientations in Fiber-Reinforced Cement-Based Materials
The distribution of fiber orientation is an important factor in determining the mechanical properties of fiber-reinforced concrete. This study proposes a new image analysis technique for improving the evaluation accuracy of fiber orientation distribution in the sectional image of fiber-reinforced concrete. A series of tests on the accuracy of fiber detection and the estimation performance of fi...
متن کاملPalm kernel fruit fiber reinforced gypsum-cement based wall panels: It’s physical and mechanical characteristics
Agricultural waste fibers have been found to be suitable as reinforcement in cement-based composites, but studies on oil palm fiber as reinforcement in gypsum-cement wall panels are scarce. A mixture of two equal weights of gypsum and cement, with water-binder ratios of 0.45 and 0.55 were prepared. In each mix a varying percentage of fiber contents of 2%, 3% and 4% by weight of the binders were...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials
سال: 2020
ISSN: 1996-1944
DOI: 10.3390/ma13030546