Microstructural characterization of as-cast hf-b alloys
نویسندگان
چکیده
منابع مشابه
Microstructural characterization and kinetics modelization of vermicular cast irons
Several experimental techniques are used for phase identification and microstructure characterization of austempered vermicular cast irons (XRD, SEM, TEM and Mössbauer spectroscopy). Acicular structures were found to be composed by ferrite and austenite with average sizes compatible with those reported for bainitic ferrite in steels. An assessment of the free energy change involved in the auste...
متن کاملConfirming the Composition of Shape Memory Alloys by Microstructural Characterization
It is well known that the properties of shape memory alloys, such as binary Ni-Ti (nitinol), are very sensitive to composition.[1-3] Especially on the Ni-rich side of stoichiometry, the martensite/austenite phase transformation temperature decreases abruptly when Ni is increased only a few tenths of a weight percent.[4] In ternary high temperature shape memory alloys (HTSMAs) containing Pt, Pd,...
متن کاملSEM and XRD Characterization of Ni-Hf Alloys at Low Hf Concentration
The alloying and phase formation in Ni-Hf samples with 0.2-, 2-, and 5-at.% Hf were studied by X-ray diffraction (XRD) technique and scanning electron microscopy (SEM). Both characterization methods, XRD and SEM, reveal the presence of the HfNi5 phase (fcc structure) where the excess Ni atoms are present in the form of Ni or Ni-rich segregations in the sample containing 5-at.% Hf. The sample wi...
متن کاملTHERMAL FATIGUE RESISTANCES OF 356 AND 413 CAST Al ALLOYS
Abstract: Thermal fatigue is a stochastic process often showing considerable scatter even in controlled environments. Due to complexity of thermal fatigue, there is no a complete analytical solution for predicting the effect of this property on the life of various components, subjected to severe thermal fluctuations. Among these components, one can mention car cylinder, cylinder head and pi...
متن کاملMicrostructural Effect on the Weldability of 25Cr-35Ni Cast Steel
The 25Cr-35Ni heat resistant steel has been widely used when resistance to oxidation and creep rapture at elevated temperatures is required. In this paper, the microstructural effect on the weldability of this alloy is investigated. The results of this study indicate that this steel has a perfect weldability in the as cast condition but does not possess good weldability in the aged condition. T...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials Research
سال: 2012
ISSN: 1980-5373,1516-1439
DOI: 10.1590/s1516-14392012005000015