Microstructural characterization of copper films produced by electrodeposition

نویسندگان
چکیده

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

CHARACTERIZATION OF CO-FE MAGNETIC FILMS FABRICATED BY GALVANO-STATIC ELECTRODEPOSITION

In this research, nanocrystalline Co-Fe coatings were electrodeposited on copper substrate. The influence of current density on different properties of the films at two pH levels was investigated. All the coatings showed nodular structure with rougher morphology at higher current densities. Due to anomalous deposition at higher current density, the amount of iron content increased and reached i...

متن کامل

Microstructural Analysis of Copper Thin Films for Characterization of Stress-induced Voiding Mechanisms

The amount of twin formation of electroplated and thermally treated copper thin films was evaluated by electron back-scattering diffraction (EBSD) analysis. The result establishes the importance of twin formation in the analysis of stress-induced voiding, and indicates that with the inclusion of a copper alloy co-element, twin formation was significantly reduced relative to pure-copper. Further...

متن کامل

Pulsed Electrodeposition of Copper

Pulsed electrolysis of copper has been systematically investigated by electrodepositing copper from a copper sulfate bath. Pulse duty cycles of 5 to 80 percent, at frequencies from 10 to 100 Hz with current densities ranging from 2.5 to 7.5 A/dm2 were employed. The appearance of Hull Cell panels with both direct current and pulsed current was recorded. The influence of pulsed current on current...

متن کامل

Formation of stable neutral copper bis-dithiolene thin films by potentiostatic electrodeposition.

Thin films of neutral copper dithiolenes have been prepared by potentiostatic electrodeposition. This method allows the isolation of near infrared (NIR) active species, in a useable form, that are otherwise unobtainable by conventional chemical methods.

متن کامل

AgInSe2 thin films prepared by electrodeposition process

In this work, the one step electrodeposition process was used to prepare Ag-In-Se thin films. The films were deposited at room temperature from a bath containing 1-3x10 M AgNO3, 6x10 -2 M InCl3 and 3x10 -2 M of H2SeO3. The KSCN at a concentration of 0.681 M was used as complexing agent. The pH value of the solution was 1.4. Applied potentials to SCE were chosen between -0.3 V and -1.1 V. Films ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Microscopy and Microanalysis

سال: 2015

ISSN: 1431-9276,1435-8115

DOI: 10.1017/s1431927614014196