Microstructural Characterization of Failed Aircraft Antenna
نویسندگان
چکیده
منابع مشابه
Microstructural Characterization of Carburized Steels
*Member of ASM International arburizing has been a popular method for obtaining a unique balance of properties in steels for many years. Steels with low carbon contents are characterized by good toughness and good ductility, but low strength and low wear resistance. By locally increasing the carbon content at the surface, followed by heat treatment to produce a very high hardness in this layer ...
متن کاملMicrostructural characterization of next generation nuclear graphites.
This article reports the microstructural characteristics of various petroleum and pitch based nuclear graphites (IG-110, NBG-18, and PCEA) that are of interest to the next generation nuclear plant program. Bright-field transmission electron microscopy imaging was used to identify and understand the different features constituting the microstructure of nuclear graphite such as the filler particl...
متن کاملMicrostructural Modification and Characterization of Sericite
Activated sericite was prepared by thermal modification, acid activation and sodium modification, and it was characterized by X-ray diffraction (XRD) analysis, differential scanning calorimetry (DSC), N₂ adsorption test, thermo-gravimetric analysis (TGA), nuclear magnetic resonance (NMR), and scanning electron microscope (SEM). The results indicated that the crystallinity of raw sericite decrea...
متن کاملA Healing System for Failed Antenna Array using PSO
In large antenna arrays possibility of getting faults for some of the radiating elements can not be denied at all the times. In such situation the pattern of the array gets distorted mostly with an increasing sidelobe level (SLL) and removal of the nulls, if any, from its desired position. In this paper a healing system using particle swarm optimization (PSO) is developed for these failed anten...
متن کاملApplications of Impedance Plane and Magnetic Differential Permeability in Microstructural Characterization of AISI D2 Tool Steel
Two nondestructive electromagnetic/magnetic techniques including hysteresis loop and eddy current methodologies have been used to characterize microstructural changes of AISI D2 cold work tool steel as a result of quench and tempering treatments. To measure the fraction retained austenite in quenched microstructure, six specimens were austenitized in the range of 1000-1130 °C. Samples austenit...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Engineering Materials and Manufacture
سال: 2018
ISSN: 0128-1852
DOI: 10.26776/ijemm.03.04.2018.01