Microstructural Characterization of ZnO Varistors.
نویسندگان
چکیده
منابع مشابه
Microstructural Characterization of Mechanically Activated ZnO-Cr2O3 System
An equimolar mixtures of starting ZnO and Cr2O3 powders were mechanically activated by grinding using a planetary ball mill for various periods of time (40 to 320 minutes). Formation of nanocrystalline ZnCr2O4 as normal spinel structure at room temperature is detected in all samples after ball-milling. A detailed XRD structural analysis (lattice parameters, site occupancy, the average primary c...
متن کاملQuality assessment of ZnO-based varistors by 1/f noise
Noise has been used as a diagnostic tool of surge arrester varistor structures comprising of ZnO grains of various type and size. The physical and electrical properties of the measured samples have been described. In the experimental study, the applied measurement system and the results of noise measurements for the selected structures of varistors designed for the continuous working voltage 28...
متن کاملMicrostructural characterization of Cu/ZnO/Al2O3 catalysts for methanol steam reforming - A comparative study
Microstructural characteristics of various real Cu/ZnO/Al2O3 catalysts for methanol steam reforming (MSR) were investigated by in situ X-ray diffraction (XRD), in situ X-ray absorption spectroscopy (XAS), temperature programmed reduction (TPR) and electron microscopy (TEM). Structure–activity correlations of binary Cu/ZnO model catalysts were compared to microstructural properties of the ternar...
متن کاملThe Role of Polypyrrole in Electrical Properties of ZnO-Polymer Composite Varistors
Composite films on the base of ZnO with different weight percentages of polypyrrole have been prepared using the hot pressing method and their current-voltage characteristics have been studied. Results show that the films have nonlinear varistor behavior and can be used to protect sensitive circuits from 110V up to 350V overvoltages. It is found that the higher the content...
متن کاملLOW-TEMPERATURE SINTERING OF HIGH VOLTAGE GRADIENT ZnO-BASED THICK FILM VARISTORS
High voltage gradient ZnO-based thick film varistors were fabricated by low-temperature sintering. The effect of sintering temperature on electrical properties of thick film varistors was investigated. The voltage gradient of thick film varistors increased significantly to 3159.4 V/mm after sintering at 725°C for 30 min. The small average grain size with good grain boundaries was the origin for...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Society of Powder and Powder Metallurgy
سال: 1995
ISSN: 0532-8799,1880-9014
DOI: 10.2497/jjspm.42.587