Microstructural Control of Carbon Fiber/Carbon Composites using High Carbon-yeild Pitches as Matrix Precursor
نویسندگان
چکیده
منابع مشابه
Reduction of Carbon-Carbon Composites using Bio Antioxidant
In past decades, carbon–carbon composites composed of multidirectional carbon fiber reinforcement embedded in carbon matrix have been significantly explored due to its excellent mechanical and physical properties. Carbon-carbon composites have light weight, high strength at high temperature in non-oxidizing atmospheres, low coefficient of thermal expansion, high electrical conductivity and high...
متن کاملHigh Strength Metal-Carbon Nanotube Composites
Uniform dispersion of pre-synthesized nanotubes in metal matrices is difficult to achieve, and there is substantial damage to the nanotubes during subsequent composite fabrication. The demonstration of an in-situ process involving chemical vapor deposition of single-wall and multi-wall carbon nanotubes into iron matrices without the concomitant formation of iron carbides is reported here. It wa...
متن کاملA ceramic–carbon hybrid as a high-temperature structural monolith and reinforcing filler and binder for carbon/carbon composites
A new ceramic–carbon nanostructured hybrid (86 vol.% ceramics, 14 vol.% carbon) formed from organoclay during pyrolysis is reported. It functions as a reinforcing filler and a binder for carbon/carbon (C/C) composites. Alone, it can also serve as a high-temperature structural monolith. During pyrolysis, the ordered montmorillonite clay (d001 31.5 Å) is transformed to mullite, cristobalite and d...
متن کاملMulti-Functional Carbon Fibre Composites using Carbon Nanotubes as an Alternative to Polymer Sizing
Carbon fibre reinforced polymers (CFRP) were introduced to the aerospace, automobile and civil engineering industries for their high strength and low weight. A key feature of CFRP is the polymer sizing - a coating applied to the surface of the carbon fibres to assist handling, improve the interfacial adhesion between fibre and polymer matrix and allow this matrix to wet-out the carbon fibres. I...
متن کاملSynthesis of copper coated carbon nanotubes for aluminium matrix composites
In this investigation copper coated carbon nanotubes (CNTs) were prepared to enhance the interfacial bonding between CNTs and aluminum matrix by the molecular-level mixing process. In optimized plating bath of (1:1) by wt. CNT with Cu, thickness of coated CNTs is reduced to 100 nm to promote uniform distribution of Cu nanoparticle on the surface of pretreated CNTs. The mixing of CNTs was accomp...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: TANSO
سال: 1992
ISSN: 1884-5495,0371-5345
DOI: 10.7209/tanso.1992.288