Microstructural Evaluation of Welded Pearlitic Rail Steel
نویسندگان
چکیده
منابع مشابه
Study on Corrosion Behavior of Pearlitic Rail Steel
The present study is an attempt to find out the effect of environmental corrosion on the commonly used pearlitic rail steel. The cases of corrosion of rail under Indian environment have been studied. It has been found that in marine environment both the yield strength and tensile strength decreases with increasing corrosion rate. In acidic environment yield strength increased with increasing co...
متن کاملEvaluation of microstructural properties and investigation of corrosion behavior of P460NH welded steel using E8018-G electrode
One of the applications of P460NH micro-alloy steel is its use in pressure vessel tanks. Electrode E8018-G can be used for welding this steel. In this study, to obtain the optimal welding parameters, the arc process based on ASME IX standard was used. Then, by sampling from the weld section, Vickers hardness test was performed and hardness profiles were drawn in different areas. Then the micro...
متن کاملEvaluation of microstructural properties and investigation of corrosion behavior of P460NH welded steel using E8018-G electrode
One of the applications of P460NH micro-alloy steel is its use in pressure vessel tanks. Electrode E8018-G can be used for welding this steel. In this study, to obtain the optimal welding parameters, the arc process based on ASME IX standard was used. Then, by sampling from the weld section, Vickers hardness test was performed and hardness profiles were drawn in different areas. Then the micro...
متن کاملMicrostructural Investigation of the Heat-affected Zone of Simulated Welded Joint of P91 Steel
T. Vuherer, University of Maribor, Faculty of Mechanical Engineering, Slovenia, M. Dunđer, University of Rijeka, Politechnika Department of Philosophy Faculty, Croatia, I. Samardžić, University of Osijek, Mechanical Engineering Faculty, Slav. Brod, Croatia, Lj. Milović, University of Belgrade, Faculty of Technology and Metallurgy, Serbia, M. Zrilić, University of Belgrade, Faculty of Technology...
متن کاملMicrostructural Properties of Semisolid Welded Joints for AISI D 2 Tool Steel
The aim of this study is to investigate experimentally the microstructural evolution of the joints using ledeburitic AISI D2 Tool Steel parts. The application of a new process of the semisolid joining of two parts of AISI D2 cold-work tool steel is proposed using a partial remelting method. Samples were heated in an argon atmosphere up to 1300°C and held for 10 minutes. Metallographic analyses ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Microscopy and Microanalysis
سال: 2013
ISSN: 1431-9276,1435-8115
DOI: 10.1017/s1431927613011094