Microstructural evolution of SiC powder in molten silicon
نویسندگان
چکیده
منابع مشابه
EFFECT OF NANO SiC ADDITIVE ON MCMB-SiC COMPOSITE FABRICATION VIA MOLTEN SILICON INFILTRATION
C-SiC composites with carbon-based mesocarbon microbeads (MCMB) preforms are new type of highpreformance and high-temperature structural materials for aerospace applications. In this study MCMB-SiC composites with high density (2.41 g.cm-3) and high bending strength (210 MPa,) was prepared by cold isostatic press of mixed mesophase carbon powder derived from mesophase pitch with different amoun...
متن کاملMicrostructural evolution of helium-implanted a-SiC
Helium has a decisive effect on the microstructure of silicon carbide materials after implantation and subsequent annealing. A dense population of bubbles and dislocation loops is already observed at relatively low displacement doses after annealing of helium-implanted a-SiC, while no visible damage appears after irradiation without helium implantation under otherwise equal conditions. The defe...
متن کاملMICROSTRUCTURAL STUDY OF SILICON NITRIDE WHISKERS PRODUCED BY NITRIDATION OF PLASMA-SPRAYED SILICON LAYERS
plasma-sprayed silicon layers have been used to produce silicon nitride layers with fibrous microstructure which optimizes fracture toughness and strength. SEM examination of the specimens shows that the surface is covered by fine needles and whiskers of Si3N4.In order to study the oxygen contamination effect as well as other contaminants introduced during spraying and nitridation processes, su...
متن کاملLOW TEMPERATURE MOLTEN SALT SYNTHESIS OF NANO CRYSTALLINE MgAl2O4 POWDER
Abstract: composition of MgO and nano boehmite. The reactant and potassium chloride, as the reaction media, were fired at800-1000 °C at different dwell times (0.5-5 h) in the ambient atmosphere. After washing and filtration, the spinel nanopowder was characterized by X-ray diffraction (XRD), Scanning electron microscopy (SEM), and Brunauer-Emmett-Teller (BET) techniques. It was demonstrated tha...
متن کاملMicrostructural Study on Molten Marks of Fire-Causing Copper Wires
Although electrical fires constitute the greatest percentage of the main causes of building fires, the critical evidence used by fire investigators to identify electrical fires is not always convincing to the general public. In this study, we scrutinized the microstructures of fire-causing copper wires and simulated the external environmental conditions required for the formation of fire-causin...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Ceramics International
سال: 2018
ISSN: 0272-8842
DOI: 10.1016/j.ceramint.2018.07.243