MICROSTRUCTURAL STUDY AND RECRYSTALLIZATION KINETICS OF DEFORMED COMMERCIAL COPPER WIRES
نویسندگان
چکیده
منابع مشابه
Microstructural Study on Molten Marks of Fire-Causing Copper Wires
Although electrical fires constitute the greatest percentage of the main causes of building fires, the critical evidence used by fire investigators to identify electrical fires is not always convincing to the general public. In this study, we scrutinized the microstructures of fire-causing copper wires and simulated the external environmental conditions required for the formation of fire-causin...
متن کاملThe recrystallization of copper single crystals deformed at 4.2 K
The deformation of copper single crystals at 4.2 K occurs by a sequence of slip, twinning and slip in the twinned structure. Subsequent annealing of the deformed structures obtained at various points at this sequence of deformation permits the detailed nature of the deformed and recrystallized states to be related in a unique fashion. Material recrystallized from structures obtained prior to th...
متن کاملKinetics of individual grains during recrystallization of cold-rolled copper
The formation of a recrystallization texture is closely related to the nucleation and growth of recrystallizing grains, which may vary from grain to grain. Cube texture is a commonly observed recrystallization texture in face centered cubic metals of medium to high stacking fault energy after heavy cold-rolling and annealing. In this work, recrystallization of pure copper cold-rolled to a von M...
متن کاملInvestigation of Recrystallization and Grain Growth of Copper and Gold Bonding Wires
Copper bonding wires were characterized using electron backscatter diffraction (EBSD). During drawing, shear components are mainly located under the surface and ,111. and ,100. fiber texture components develop with similar volume fractions. Grain average misorientation (GAM) and scalar orientation spread (SOS) of the ,100. component are lower than those of the ,111. or other orientations. Also,...
متن کاملIsothermal Recrystallization Behavior of Cold-deformed Martensite in an Ultra-low-carbon Microalloyed Steel
One of the most promising ways to produce a grain-refined microstructure in some steel materials is the thermomechanical processing route of subcritical recrystallization annealing of a cold-deformed martensite structure. In the present study, the microstructural evolutions and the associated recrystallization kinetics under various subcritical annealing heat treatment conditions are explored i...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Acta Metallurgica Slovaca
سال: 2018
ISSN: 1338-1156,1335-1532
DOI: 10.12776/ams.v24i1.1011