Microstructure and mechanical properties of atomic layer deposited alumina doped zirconia
نویسندگان
چکیده
منابع مشابه
Elaboration of Alumina-Zirconia Composites: Role of the Zirconia Content on the Microstructure and Mechanical Properties
Alumina-zirconia (AZ) composites are attractive structural materials, which combine the high hardness and Young's modulus of the alumina matrix with additional toughening effects, due to the zirconia dispersion. In this study, AZ composites containing different amounts of zirconia (in the range 5-20 vol %) were prepared by a wet chemical method, consisting on the surface coating of alumina powd...
متن کاملBiocompatibility of atomic layer-deposited alumina thin films.
Presented in this paper is a study of the biocompatibility of an atomic layer-deposited (ALD) alumina (Al2O3) thin film and an ALD hydrophobic coating on standard glass cover slips. The pure ALD alumina coating exhibited a water contact angle of 55 degrees +/- 5 degrees attributed, in part, to a high concentration of -OH groups on the surface. In contrast, the hydrophobic coating (tridecafluoro...
متن کاملAtomic layer deposited alumina (Al2O3) thin films on a high-Q mechanical silicon oscillator
In this paper, the influence of the atomic layer deposited alumina (Al2O3) thin films on the dynamics of a high-Q mechanical silicon oscillator was experimentally studied. The resonance frequency and Q value of uncoated oscillators used in this work were about f0 = 27 kHz and Q = 100 000 at p < 10−2 mbar and T = 300 K. Deposited alumina film thicknesses varied from 5 to 662 nm. It is demonstrat...
متن کاملdetermination of some physical and mechanical properties red bean
چکیده: در این تحقیق، برخی خواص فیزیکی و مکانیکی لوبیا قرمز به-صورت تابعی از محتوی رطوبت بررسی شد. نتایج نشان داد که رطوبت بر خواص فیزیکی لوبیا قرمز شامل طول، عرض، ضخامت، قطر متوسط هندسی، قطر متوسط حسابی، سطح تصویر شده، حجم، چگالی توده، تخلخل، وزن هزار دانه و زاویه ی استقرار استاتیکی در سطح احتمال 1 درصد اثر معنی داری دارد. به طوری که با افزایش رطوبت از 54/7 به 12 درصد بر پایه خشک طول، عرض، ضخام...
15 صفحه اولMicrostructure and mechanical properties of pressureless sintered alumina-silver composites
The silver toughened alumina ceramics, which were fabricated via a conventional ceramic processing route using commercially available alumina and silver oxide powders as the starting materials, exhibit a higher fracture toughness (6 to 9 MPamo.5) than the monolithic alumina ceramic ( 2.5 to 3.0 MPamo.5). The weak interfacial bonding between the silver inclusions and the alumina matrix is charac...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: AIP Advances
سال: 2021
ISSN: 2158-3226
DOI: 10.1063/5.0047572