Microstructure and Mechanical Properties on Solid Solution Heat Treatment of Al-6Si-2Cu Alloy for Lightweight Automotive
نویسندگان
چکیده
منابع مشابه
Effects of Different Heat Treatment on Microstructure, Mechanical and Conductive Properties of Continuous Rheo-Extruded Al-0.9Si-0.6Mg (wt%) Alloy
Al-0.9Si-0.6Mg (wt%) alloy conductive wires were designed and produced by continuous rheo-extrusion process. The effects of different heat treatment on microstructure, mechanical and conductive properties of the wires were studied. Results show that, after T6 heat treatment, conductive property of the alloy increased while elongation decreased with the higher aging temperature and longer aging ...
متن کاملEffect of Heat Treatment Parameters on the Mechanical and Microstructure Properties of Low-Alloy Steel
This study examines the effect of heat treatment at three different temperatures of 800 ̊C, 950 ̊C and 1100 ̊C on the microstructure and mechanical properties of low-alloy steel with an addition of manganese, chrome and lead. To determine an impact of the applied heat treatment operations, testing of mechanical properties and microstructural examinations of the steel with 0.23%, 0.24%, 0.29% and 0...
متن کاملEffect of Heat Treatment on Mechanical Properties and Microstructure of Alloy 901
Two types of heat treatments are commonly used for alloy 901, one to optimize resistance to creep and rupture and the other, to improve tensile and fatigue properties. Solution and aging-treatment parameters (temperature, time, quench) for both types of heat treatment were varied within the ranges permitted by common specifications to define heat treatments resulting in improved combinations of...
متن کاملA Comparative Study on the Microstructure and Mechanical Properties of Al-Si-Cu/1wt %NCP Composites after T6 Heat Treatment
In this article, microstructural characteristics and mechanical properties of Al-Si-Cu/NCP composites were evaluated. Reinforced nanocomposites with 1 wt% nano-clay were fabricated by the method of the stir casting. Stirring times and temperatures were variable parameters to produce specimens. Consequently, the effect of a T6 heat treatment, which contained solutioning at 490 ºC for ...
متن کاملEffect of Solution Treatment Temperature on Microstructure and Mechanical Properties of A356 Alloy
Over the years, aluminum content in a vehicle part is increasing due to the needs to reduce weight as well as increase fuel efficiency. Most of the cast product in a vehicle part is mostly cast from A356 alloy. It is used because A356 alloy posses’excellent characteristics over other type of alloy such as cast ability, high weight-to-strength ratio, good corrosion resistance and good weld-abili...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Korean Journal of Materials Research
سال: 2014
ISSN: 1225-0562
DOI: 10.3740/mrsk.2014.24.10.538