Microstructure and Mechanical Property Evaluation of Aluminum F357 Powder for Cold Spray Applications

نویسندگان

چکیده

Abstract Cold spray (CS) is a solid-state additive manufacturing process that can create high-density, high-performance deposits for many applications. Aluminum alloys have been the target of recent CS research due to their excellent mechanical behavior when cold-sprayed. The introduction new Al interest as unique properties may be achieved, especially powder heat-treated prior deposition. In this study, three batches F357 powder—a control as-atomized, at 230 °C 75 min and 385 6 h—were studied. Scanning electron microscopy revealed microstructural modifications after heat treatment in sprayed deposits. X-ray diffraction highlighted presence eutectic Si, Mg 2 Si SiO all specimens. Energy-dispersive spectroscopy showed spheroidization during treatment, with an increase fraction both treatments. Nanohardness microhardness testing decrease hardness thermal processing Tensile demonstrated ductile from powders, but significantly higher strengths treatment. These results suggest used appropriate treatments are applied.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Effects of Friction Stir Process Parameters on Microstructure and Mechanical properties of Aluminum Powder Metallurgy Parts

The effects of friction stir processing (FSP) on the microstructure and mechanical properties of aluminum powder metallurgy (PM) parts was investigated. PM parts were then subjected to FSP at advancing speeds (v) of 40-200 mm/min and tool rotational speeds (ω) of 800-1600 rpm. Microhardness (HV) and tensile tests at room temperature were used to evaluate the mechanical properties of the frictio...

متن کامل

Powder Stream Characteristics in Cold Spray Nozzles

The exponential increase of industrial demand in the past two decades has led scientists to the development of alternative technologies for the fast manufacturing of engineering components, aside from standard and time consuming techniques such as casting or forging. Cold Spray (CS) is a newly developed manufacturing technique, based upon the deposition of metal powder on a substrate due to hig...

متن کامل

Process Development & Microstructure & Mechanical Property Evaluation of a Dual Microstructure Heat Treated Advanced Nickel Disc Alloy

This paper summarises Rolls-Royce’s efforts in developing a production capable and industrially robust process for the production of dual-microstructure components. This has been possible through the use of process modeling, full-scale validation trials, detailed microstructural assessment through a variety of destructive and non-destructive methods and mechanical property evaluation. This pape...

متن کامل

Mechanical milling of aluminum powder using planetary ball milling process

Mechanical alloying has recently attracted considerable attention as researchers strive to enhance nanocomposite properties and extend their utility. The process can be performed at room temperature and homogeneous nanocomposite powders can be produced. In this paper, we investigated the effect of different ball milling parameters and operating conditions (milling time, ball size, processing co...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Journal of Thermal Spray Technology

سال: 2021

ISSN: ['1059-9630', '1544-1016']

DOI: https://doi.org/10.1007/s11666-020-01140-4