Microstructure and Phase Constitution Near the Interface of Explosively Welded Aluminum/Copper Plates
نویسندگان
چکیده
منابع مشابه
Investigation of Standoff Distance Effect on Corrosion Behavior of Explosively Welded Joint between Two Aluminum Plates and Steel
In the present research, the effect of standoff distance on corrosion properties of the joint of three aluminum–steel explosive layers has been studied. For this purpose, the samples were welded with various standoff distance under constant explosive load. Optical Microscopy and Scanning Electron Microscopy were used to measure the quality of the joint and type of interface. Furthermore, point ...
متن کاملDistortion of laser welded titanium plates.
The distortion of laser welded titanium plates was assessed for different operating conditions of the laser welding device, and with different welding parameters (in terms of weld point and prewelding). In this study, Nd : YAG laser welding device was used to join the titanium plates. The results showed that distortion increased stepwise after each welding point along the welding zone (one-side...
متن کاملbuckling of viscoelastic composite plates using the finite strip method
در سال های اخیر، تقاضای استفاده از تئوری خطی ویسکوالاستیسیته بیشتر شده است. با افزایش استفاده از کامپوزیت های پیشرفته در صنایع هوایی و همچنین استفاده روزافزون از مواد پلیمری، اهمیت روش های دقیق طراحی و تحلیل چنین ساختارهایی بیشتر شده است. این مواد جدید از خودشان رفتارهای مکانیکی ارائه می دهند که با تئوری های الاستیسیته و ویسکوزیته، نمی توان آن ها را توصیف کرد. این مواد، خواص ویسکوالاستیک دارند....
An Experimental Study on the process parameters of Incremental Forming of Explosively-Welded Al/Cu Bimetal
Single point incremental sheet metal forming is a sheet metal forming process that forms products without the complex dies and tools with low cost. In this study, the incremental sheet metal forming process has been experimentally investigated on the explosively-welded Al/Cu bimetal sheets. Also, the effects of process parameters, such as arrangement of layer`s bimetal, tool diameter and tool p...
متن کاملبررسی بارگذاری انفجاری متغیر بر خواص اتصال انفجاری مس به فولاد زنگ نزن مارتنزیتی ۴۱۰
In this research, Effect of explosive ratio parameter on interface properties of explosively bonded copper-410 martensitic stainless steel were investigated, plates were welded in constant standoff distance with different explosive ratios. Optical microscopy, scanning electron microscopy, Microhardness and Tensile shear tests were carried out. The results showed that wavelength, wave amplitude,...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Metallurgical and Materials Transactions A
سال: 2013
ISSN: 1073-5623,1543-1940
DOI: 10.1007/s11661-013-1703-1