Microstructure characterization of large TiC-Mo-Ni cermet tiles
نویسندگان
چکیده
منابع مشابه
Microstructure Characterization and Wear-Resistant Properties Evaluation of an Intermetallic Composite in Ni–Mo–Si System
Intermetallic compounds have been studied for their potential application as structural wear materials or coatings on engineering steels. In the present work, a newly designed intermetallic composite in a Ni-Mo-Si system was fabricated by arc-melting process with commercially pure metal powders as starting materials. The chemical composition of this intermetallic composite is 45Ni-40Mo-15Si (at...
متن کاملEffect of Ni content on the reaction behaviors and microstructure of TiB2-TiC/Ni cermets synthesized by MASHS
In this paper TiB2-TiC/Ni cermet with various Ni (20, 40 and 60 wt %) content were synthesized by mechanically activated self-propagating synthesis (MASHS) and effect of the addition of Ni on synthesis parameters and microstructure of synthesized samples were investigated. First raw materials (B4C, Ti and Ni) milled in Ar atmosphere. Then milling powders analyzed by XRD. In next step powders sy...
متن کاملEffect of Density on the Microstructure and Mechanical Behavior of Powder Metallurgy Fe-mo-ni Steels
The microstructure and mechanical properties of Fe-0.85Mo-Ni powder metallurgy (P/M) steels were investigated as a function of sintered density. A quantitative analysis of microstructure was correlated with tensile and fatigue behavior to understand the influence of pore size, shape, and distribution on mechanical behavior. Tensile strength, Young’s modulus, strain-to-failure, and fatigue stren...
متن کاملElectrodeposition of Cu into a Highly Porous Ni/YSZ Cermet
The electrochemical deposition of Cu into 0.12 cm and 60 μm thick, highly porous 65 vol % Ni/yttriastabilized zirconia (YSZ) cermets was investigated. An electrochemical cell in which the electrolyte solution was allowed to flow through a porous Ni/YSZ substrate was used to eliminate mass-transfer limitations and to determine the conditions for which the potential drop in the electrolyte soluti...
متن کاملRelationship between microstructure and acoustic emission in Mn-Mo-Ni A533B steel
The sources of acoustic emission in a steel of the A533B composition with low sulphur content have . been investigated using two different recording techniques. First, systematic narrow band (0·11'OMHz) measurements were made of acoustic emission activity during uniaxial tensile tests of specimens with a range of controlled microstructures. Mechanical properties and fracto graphic data were ana...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Refractory Metals and Hard Materials
سال: 2017
ISSN: 0263-4368
DOI: 10.1016/j.ijrmhm.2017.07.004