Microstructure Evolution and Failure Modes of a Resistance Spot Welded TWIP Steel
نویسندگان
چکیده
منابع مشابه
Characterization of Microstructure and Mechanical Properties of Resistance Spot Welded DP600 Steel
Resistance spot welding (RSW) as a predominant welding technique used for joining steels in automotive applications needs to be studied carefully in order to improve the mechanical properties of the spot welds. The objectives of the present work are to characterize the resistance spot weldment of DP600 sheet steels. The mechanical properties of the welded joints were evaluated using tensile-she...
متن کاملMicrostructure and Tensile-Shear Properties of Resistance Spot-Welded Medium Mn Steel
The medium Mn steels are gaining increasing attention due to their excellent combination of mechanical properties and material cost. A cold-rolled 0.1C5Mn medium Mn steel with a ferrite matrix plus metastable austenite duplex microstructure was resistance spot-welded with various welding currents and times. The nugget size rose with the increase of heat input, but when the welding current excee...
متن کاملResistance spot welding of AISI 201 stainless steel: The relationship between welding current, microstructure, mechanical properties and failure mode
In this paper, resistance spot welding process of AISI 201 stainless steel is studied experimentally. For this purpose, effect of welding current on quality of weld is investigated and relationships between welding current and fusion zone characteristics are examined. For determining mechanical properties such as maximum load and fracture mode, tensile - shear test of spot welds is performed. ...
متن کاملResistance spot welding of AISI 201 stainless steel: The relationship between welding current, microstructure, mechanical properties and failure mode
In this paper, resistance spot welding process of AISI 201 stainless steel is studied experimentally. For this purpose, effect of welding current on quality of weld is investigated and relationships between welding current and fusion zone characteristics are examined. For determining mechanical properties such as maximum load and fracture mode, tensile - shear test of spot welds is performed. ...
متن کاملEqual Channel Angular Pressing of a TWIP steel: Microstructure and mechanical response
A Fe-20.1Mn-1.23Si-1.72Al-0.5C TWIP steel with ultra-fine grain structure was successfully processed through Equal Channel Angular Pressing (ECAP) at warm temperature up to four passes following the BC route. The microstructure evolution was characterized by Electron Back Scattered Diffraction (EBSD) to obtain the grain maps, which revealed an obvious reduction of grain size, as well as a decre...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Soldagem & Inspeção
سال: 2018
ISSN: 1980-6973,0104-9224
DOI: 10.1590/0104-9224/si2304.02