Microstructure evolution in laser powder bed fusion-built Fe-Mn-Si shape memory alloy
نویسندگان
چکیده
Microstructures is an international peer-reviewed, open access, online journal. The journal of publishes articles covering new research and developments, perspectives, reviews related to the microstructures materials, including, but not limited metals alloys, ceramics, polymers, composites, crystals, glasses, biomaterials, interfaces nanomaterials.
منابع مشابه
Transformation Reversibility in Fe-Mn-Si Shape Memory Alloy
The change of the surface relief associated with stress-induced epsilon martensite before and after the reverse transformation in an Fe-33%Mn-6%Si alloy (Msz264K) has been investigated. The permanent strain of a 2.7% tensile-strained specimen was 1.1% after the reverse transformation. In this specimen, a large part of surface relief still remained after heating to 623K (above Af). When five tra...
متن کاملAnisotropy of Several Properties in a Polycrystalline Fe-Mn-Si Based Shape Memory Alloy
The tensile properties, 7-E transformation and shape recovery have been related to the orientation of tensile axes i.e., along rolling direction(specimen 'A') and toward 45" to the rolling direction(specimen 'B') in a cold-rolled and then annealed Fe-1SMn -10Co-SCr-3Si alloy. It is revealed that the deformation modes of the specimens 'A' and 'B' with respect to tensile axes are not the same; te...
متن کاملFormation Process of Lamella Structures by Deformation in an Fe-Mn-Si-Cr-Ni Shape Memory Alloy
For Fe-Mn-Si-Cr-Ni shape memory alloys, it was previously found by HREM study that the formation of the nanometric lamella structures consisting of f.c.c. and h.c.p. phase is very important to exhibit good shape memory effect. In the present work, the formation process of such lamella structures has been studied in detail. The results are as follows. The transformation is initiated by random fo...
متن کاملMicrostructure and corrosion characteristics of laser-alloyed magnesium alloy AZ91D with Al-Si powder.
Blown-powder laser surface alloying was performed on the magnesium alloy AZ91D with Al-Si alloy powder to improve corrosion resistance. Characterization by scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS) and x-ray diffraction (XRD) analysis revealed that intermetallic compounds (IMCs) of Mg2Si, Al12Mg17 and Al3Mg2 were formed in the matrix of α-Mg and Al solid solutions...
متن کاملStudy of the Microstructure and Cracking Mechanisms of Hastelloy X Produced by Laser Powder Bed Fusion
Hastelloy X (HX) is a Ni-based superalloy which suffers from high crack susceptibility during the laser powder bed fusion (LPBF) process. In this work, the microstructure of as-built HX samples was rigorously investigated to understand the main mechanisms leading to crack formation. The microstructural features of as-built HX samples consisted of very fine dendrite architectures with dimensions...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Microstructures
سال: 2023
ISSN: ['2770-2995']
DOI: https://doi.org/10.20517/microstructures.2022.33