Microstructure evolution of Ti5Si3 in Cu-Ti-Si alloys

Corrosion Characteristics of a - Ti and Ti 2 Cu Composing Ti - Cu Alloys

A series ef binary Ti-Cu alloys containing 5-20 mass% Cu was prepared, and the corresien behavior of a-Ti and Ti2Cu composing the Ti-Cu alloys were examined based on the anodic polarization curves and released iens in O.9% NaCl and 1% lactic acid solutions. In both selutions, the Ti-Cu alloys showed the same anodic polarization curves as titanium in the conditien below 1.4 V. Hewever, precipita...

Machinability of Experimental Ti-Cu Alloys

This study is an investigation of the machinability of experimental Ti-Cu alloys (2, 5, and 10mass% Cu) as new dental titanium alloy candidates for CAD/CAM use. The alloys were slotted with a vertical milling machine and carbide square end mills under two cutting conditions. Their machinability was evaluated through cutting force using a three-component force transducer fixed on the table of th...

TRIBOLOGICAL PROPERTIES OF Ti-Si-Zr ALLOYS

Nowadays titanium alloys are extensively used for aerospace and biomedical applications. However, despite good mechanical properties and excellent corrosion resistance they possess poor wear resistance and a tendency to galling and seizure. In this study the tribological properties of experimental Ti-Si-Zr based alloys were studied using a standard ball-on-disc wear testing system. The wear and...

Microstructure of nanostructured amorphous Si-Au-alloys

Thermodynamic and experimental study of Ti-Ag-Cu alloys

Phase equilibria in the ternary Ti-Ag-Cu system have been studied thermodynamically and experimentally at various temperatures. The thermodynamic analysis was performed by combining the most recent data on the binary Ag-Cu, Ti-Ag and Ti-Cu systems and experimental information obtained by the diffusion couple technique. The eutectic and three noneutectic binary Ag-Cu alloys were melted and annea...