Microstructure of kajmak skin layer made during kajmak production
نویسندگان
چکیده
منابع مشابه
Microstructure of Retrievals Made from Standard Cast HC-CoCrMo Alloys
During the past decade, self-mating metal bearings based on cobalt– chromium–molybdenum (CoCrMo) alloys have become very popular in total hip replacements and hip resurfacings. This led to a market share of more than 35 % for metal-on-metal (MoM) bearings in the United States before several cases of high wear with biologic consequences led to a sharp drop in popularity. In part, these failures ...
متن کاملTailor-made biofunctionalized nanoparticles using layer-by-layer technology.
Layer-by-layer (LBL) technique is a well-established method for the formation of nanofilms on planar surfaces, as well as on micro-sized colloidal particles. For surface functionalization of nanoparticles, it is a very recent area of research receiving great interest due to the advantage of obtaining fine control over the shell composition, charge and thickness, offering several applications in...
متن کاملEffect of smear layer on the retention of custom made posts luted with two different cements
Effect of smear layer on the retention of custom made posts luted with two different cements Dr. H. Sazgara*- Dr. K. Seyyedan ** - Dr. A.H. Majidi*** *Associate Professor of Fixed Prosthodontics Dept., Faculty of Dentistry, Shaheed Beheshti University of Medical Sciences.**Assistant Professor of Fixed Prosthodontics Dept., Faculty of Dentistry, Shaheed Beheshti University of Medical Sciences. *...
متن کاملTorsion in Microstructure Hollow Thick-Walled Circular Cylinder Made up of Orthotropic Material
In this paper, a numerical solution has been developed for hollow circular cylinders made up of orthotropic material which is subjected to twist using micro polar theory. The effect of twisting moment and material internal length on hollow thick-walled circular cylinder made up of micro polar orthotropic material is investigated. Finite difference method has been used to exhibit the influence o...
متن کاملEvaluation of microstructure and mechanical properties of 410NiMo as an overlay layer on low alloy steel
The aim of this study is to reach an increased service life for parts using in sour environment by weld overlaying process. In this investigation, two successive layers of ER410NiMo were clad on low alloy steel substrates. To reduce the likelihood of Hydrogen Induced Cracking (HIC) and producing stable hydrogen traps, Post Weld Heat Treatment (PWHT) was conducted. Microstructural analysis, X-ra...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Mljekarstvo
سال: 2020
ISSN: 1846-4025,0026-704X
DOI: 10.15567/mljekarstvo.2020.0302