Microstructure optimization of alumina/zirconia materials resistant for abrasive wear

A physically-based abrasive wear model for composite materials

A simple physically-based model for the abrasive wear of composite materials is presented based on the mechanics and mechanisms associated with sliding wear in soft (ductile)matrix composites containing hard (brittle) reinforcement particles. The model is based on the assumption that any portion of the reinforcement that is removed as wear debris cannot contribute to the wear resistance of the ...

Emission Factors for Abrasive Materials

Abrasive blasting materials, such as coal slag garnet and copper slag, are often used for cleaning metal surfaces to remove rust and to prepare a surface before the application of a coating. The pre-blast and post-blast (spent) abrasive materials contain traces of heavy metal constituents such as Cr, Mn, Ni, Pb Fe, and Ba. Hence, the health risk associated with the resultant particulate emissio...

Effect of Abrasive Size on Wear

Modelling Friction and Abrasive Wear of Elastomers

In order to properly model the friction and wear of elastomer materials, it is essential to understand some specific mechanical and tribological features. Mechanical characteristics of elastomer materials are different from those of metals and other relatively hard materials. Elastomers can bear large deformations, the stress-strain curves are non-linear, time and temperature dependent. When th...

Bottom-up approach for microstructure optimization of sound absorbing materials.

Results from a numerical study examining micro-/macrorelations linking local geometry parameters to sound absorption properties are presented. For a hexagonal structure of solid fibers, the porosity phi, the thermal characteristic length Lambda('), the static viscous permeability k(0), the tortuosity alpha(infinity), the viscous characteristic length Lambda, and the sound absorption coefficient...