Microstructure Refinement and Texture Evolution of Titanium by Friction Roll Surface Processing
نویسندگان
چکیده
منابع مشابه
effects of friction stir welding tool plunge depth on microstructure and texture evolution of aa1100 to a441 aisi joint
the aim of this article is study of tool plunge depth (tpd) effects on mechanical properties of friction stir welding of aa1100 aluminium alloy to a441 aisi steel. for this purpose the 0.1, 0.2, 0.4, and 0.6 mm tpd selected and other welding parameters kept constant. the results shows that the frictional heat increases and stir zone grain size decreases with increasing tpd at both base metals. ...
متن کاملInvestigating the effect of tool dimension and rotational speed on microstructure of Al-B4C surface composite layer produced by friction stir processing (FSP)
Friction stir processing (FSP) was used for the fabrication of Al-B4C surface composite. Al-Mg-Si alloy was considered as the substrate and B4C particles were incorporated into the substrate by thermo-mechanical effect of FSP. The effect of tool dimensions and different rotational speeds on the microstructure and microhardness of the composite layers was evaluated and the optimum process parame...
متن کاملMicrostructure and Crystallographic Texture Characterization of Friction Stir Welded Thin AA2024 Aluminum Alloy
Friction stir welding (FSW) is a promising technique to join aluminum alloys without having problems encountered during fusion welding processes. In the present work, the evolution of microstructure and texture in friction stir welded thin AA2024 aluminum alloy are examined by electron backscattered diffraction (EBSD) technique. The sheets with 0.8 mm thickness were successfully welded by frict...
متن کاملThe effect of twinning on texture evolution during ECAP processing of an AM30 magnesium alloy
An AM30 magnesium alloy was processed through ECAP method at 200 °C. Optical and transmission electron microscopy as well as electron back scattered diffraction (EBSD) technique were employed to characterize the deformed microstructure. A partially recrystallized microstructure including ultrafine/nano structures was obtained. The area fraction of 49% was measured for the recrystallized regions...
متن کاملModification of Silica surface by Titanium sol synthesis and characterization
Hydrophobic silica titanium nanoparticles (STNPs) were successfully synthesized by the sol-gel process using liquid modification. Fourier transform infrared (FTIR) and X-ray fluorescence (XRF) studies were demonstrated the attachment of titanium on the silica surface. Titanium content enhanced the agglomeration of particles as shown in topography results. The N2 adsorption-desorption followed T...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: MATERIALS TRANSACTIONS
سال: 2009
ISSN: 1345-9678,1347-5320
DOI: 10.2320/matertrans.mer2008294