Microstructures, Textures and Mechanical Properties Evolution during Cold Drawing of Pure Mg
نویسندگان
چکیده
منابع مشابه
determination of some physical and mechanical properties red bean
چکیده: در این تحقیق، برخی خواص فیزیکی و مکانیکی لوبیا قرمز به-صورت تابعی از محتوی رطوبت بررسی شد. نتایج نشان داد که رطوبت بر خواص فیزیکی لوبیا قرمز شامل طول، عرض، ضخامت، قطر متوسط هندسی، قطر متوسط حسابی، سطح تصویر شده، حجم، چگالی توده، تخلخل، وزن هزار دانه و زاویه ی استقرار استاتیکی در سطح احتمال 1 درصد اثر معنی داری دارد. به طوری که با افزایش رطوبت از 54/7 به 12 درصد بر پایه خشک طول، عرض، ضخام...
15 صفحه اولEvolution of microstructures and mechanical properties of AZ31 magnesium alloy weldment with TIG and Pulsed TIG process
Magnesium alloys are very attractive materials owing to their properties of low density, high specific strength and stiffness, good castability, and weldability. AZ31 magnesium alloys in terms of weldability has better situation than the other, so it has more applications than other magnesium alloys. In this study, TIG and pulsed TIG welding method was used to welding the AZ31 alloy and finally...
متن کاملMorphology Development and Mechanical Properties Variation during Cold-Drawing of Polyethylene-Clay Nanocomposite Fibers
In this work, the influence of composition and cold-drawing on nanoand micro-scale morphology and tensile mechanical properties of PE/organoclay nanocomposite fibers was investigated. Nanocomposites were prepared by melt compounding in a twin-screw extruder, using a maleic anhydride grafted linear low density polyethylene (LLDPE–g–MA) and an organomodified montmorillonite (Dellite 67G) at three...
متن کاملEvolution of microstructures and mechanical properties of AZ31 magnesium alloy weldment with TIG and Pulsed TIG process
Magnesium alloys are very attractive materials owing to their properties of low density, high specific strength and stiffness, good castability, and weldability. AZ31 magnesium alloys in terms of weldability has better situation than the other, so it has more applications than other magnesium alloys. In this study, TIG and pulsed TIG welding method was used to welding the AZ31 alloy and finally...
متن کاملDevelopment Microstructure and Mechanical Properties of Commercially Pure Titanium Processed by Equal Channel Angular Pressing and Cold Drawing
Equal channel angular pressing has been used to refine the grain size of commercially pure titanium (grade 2) as well as other metals and alloys. Titanium grade 2 is usually processed at about 350 °C because it lacks sufficient ductility at lower temperatures. The warm processing temperature limits the capability of the equal channel angular pressing technique in improving the strength of titan...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Microscopy Research
سال: 2013
ISSN: 2329-3306,2329-3314
DOI: 10.4236/mr.2013.12003