Microwave Absorption Properties of Ba<sub>0,9</sub> Ca<sub>0,1</sub> Fe<sub>12</sub>O<sub>19</sub>/Fe<sub>2</sub>O<sub>3</sub> Nanocomposite Prepared using Planetary Ball Milling
نویسندگان
چکیده
In this paper, the nanocomposite magnetic material (NCMM) of substituted BaFe 12 O 19 and Fe 2 3 was synthesized by using solid state reaction (SSR) method. Ba 0.9 Ca 0.1 with different absorption frequencies were chosen to fabricate . The crystalline structure microwave properties investigated X-ray diffraction (XRD) a vector network analyzer (VNA) in frequency range 7-13 GHz, respectively. results show that crystallographic analysis resulted phases as NCMM is an optimum attenuation broad range. Its minimum reflection loss (RL) about –38.42 dB. indicated MCMM have good RL broadband
منابع مشابه
Mechanical milling of aluminum powder using planetary ball milling process
Mechanical alloying has recently attracted considerable attention as researchers strive to enhance nanocomposite properties and extend their utility. The process can be performed at room temperature and homogeneous nanocomposite powders can be produced. In this paper, we investigated the effect of different ball milling parameters and operating conditions (milling time, ball size, processing co...
متن کاملMicrostructural Characterization of Calcite-Based Powder Materials Prepared by Planetary Ball Milling
In this work, a planetary ball milling was used to modify the surface properties of calcite-based material from waste oyster shell under the rotational speed of 200-600 rpm, grinding time of 5-180 min and sample mass of 1-10 g. The milling significantly changed the microstructural properties of the calcite-based minerals (i.e., surface area, pore volume, true density, and porosity). The surface...
متن کاملA Study of Nanocrystalline Cobalt Prepared by Ball Milling
The hcp-fcc transformation induced in cobalt powder by ball milling at room temperature was studied using the excess Gibbs free energy for the metals, in nanometric form, to calculate the activation barriers that the atoms must overcome for the phase transformation to occur. The crystalline component of the nanocrystaline cobalt produced in our laboratory, via ball milling, was analized using t...
متن کاملIon Transport Properties of the Inverse Perovskite BaLiF3 Prepared by High-Energy Ball Milling
For many applications such as advanced energy storage systems, chemical sensors or electrochromic devices fast ionic conduction plays an important role. In many cases, see e.g., Refs. [1-3], nanocrystal-line ceramics with crystallite diameters smaller than 50 nm show an enhanced ion conductivity compared to their coarse-grained counterparts, i.e., single crystals or materials with µm-sized part...
متن کاملFlux Pinning Optimization of Bulk Samples Prepared Using High-Energy Ball Milling and Addition of
is considered to be an important conductor for applications. Optimizing flux pinning in these conductors can improve their critical currents. Doping can influence flux pinning efficiency and grain connectivity, and also affect the resistivity, upper critical field and critical temperature. This study was designed to attempt the doping of on the Mg sites with metal-diborides using high-energy ba...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of physics
سال: 2022
ISSN: ['0022-3700', '1747-3721', '0368-3508', '1747-3713']
DOI: https://doi.org/10.1088/1742-6596/2377/1/012005