Microwave imaging of skin damage at experimental burns
نویسندگان
چکیده
منابع مشابه
Skin Grafting of Burns
This book outlines the essential points of care which have proved of benefit in treating a large series of patients with full-thickness loss of skin and requiring skin grafting, at the Washington University Medical School Children's Hospital and Barnes Hospital, during the course of a long period. In the first chapter, the authors stato : ' In the extensive literature on burn's, there has been ...
متن کاملMicrowave Imaging Using SAR
Polarimetric Synthetic Aperture Radar (Pol.-SAR) allows us to implement the recognition and classification of radar targets. This article investigates the arrangement of scatterers by SAR data and proposes a new Look-up Table of Region (LTR). This look-up table is based on the combination of (entropy H/Anisotropy A) and (Anisotropy A/scattering mechanism α), which has not been reported up now. ...
متن کاملSkin Imaging at 7T
High-resolution in vivo imaging is SNR-limited. Recently, 7 nL resolution skin imaging was demonstrated at 3 T, using a dedicated 1-inch-diameter receive-only coil [1]. At 7 T, 16 nL resolution images were obtained with a 4-inch-diameter transmit-receive coil [2]. Small coils are well suited to high-field systems where they behave as mid-range coils [3]. However, frequency offsets due to chemic...
متن کامل3D Microwave Imaging Technology For Damage Detection of Concrete Structures
Various nondestructive evaluation (NDE) techniques have been studied to locate steel rebars or dowel, and to detect invisible damage such as voids and cracks inside concrete and debonding between rebars and concrete caused by corrosions and earthquakes. In this study, the authors developed 3-dimensional (3D) electromagnetic (EM) imaging technology to detect such damage and to identify exact loc...
متن کاملAirbag-Induced Thermal Skin Burns
Two new techniques for investigating the thermal skinburn potential of airbags are presented. A reduced-volume airbag test procedure has been developed to obtain airbag pressures that are representative of a dynamic ridedown event during a static deployment. Temperature and heat flux measurements made with this procedure can be used to predict airbag thermal burn potential. Measurements from th...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: EPJ Web of Conferences
سال: 2018
ISSN: 2100-014X
DOI: 10.1051/epjconf/201819508005