Milled Surface Generation Model for Chip Thickness Detection in Peripheral Milling
نویسندگان
چکیده
منابع مشابه
Chip Formation and Minimum Chip Thickness in Micro-milling
In the current context of miniaturization, micro-machining processes are in full expansion. One of them is micro-milling. Although micro-milling is based on the same principle as macro-milling, the phenomena of micro-cutting are not a simple scaling of macrocutting. A significant difference is the chip formation involving the phenomenon of minimum chip thickness. In micro-milling the depth of c...
متن کاملEmotional Learning Based Intelligent Controller for MIMO Peripheral Milling Process
During the milling process, one of the most important factors in reducing tool life expectancy and quality of workpiece is the chattering phenomenon due to self-excitation. The milling process is considered as a MIMO strongly coupled nonlinear plant with time delay terms in cutting forces. We stabilize the plant using two independent Emotional Learning-based Intelligent Controller (ELIC) in par...
متن کاملSurface Interaction Model for Great Thickness Masonry
At present, many of the historic masonry structures in the most important seismic zone of Argentina present damages due to the actions to which they have been subjected. Therefore, it is necessary to study the behavior of walls of ceramic masonry of great thickness. This work presents the comparison between the results obtained from the numerical simulation of ceramic masonry walls subjected to...
متن کاملislanding detection methods for microgrids
امروزه استفاده از منابع انرژی پراکنده کاربرد وسیعی یافته است . اگر چه این منابع بسیاری از مشکلات شبکه را حل می کنند اما زیاد شدن آنها مسائل فراوانی برای سیستم قدرت به همراه دارد . استفاده از میکروشبکه راه حلی است که علاوه بر استفاده از مزایای منابع انرژی پراکنده برخی از مشکلات ایجاد شده توسط آنها را نیز منتفی می کند . همچنین میکروشبکه ها کیفیت برق و قابلیت اطمینان تامین انرژی مشترکان را افزایش ...
15 صفحه اولSurvey and Study of Machinability for Titanium Alloy Ti-6Al-4V through Chip Formation in Milling Process
Most of the materials used in the industry of aero-engine components generally consist of titanium alloys. Advanced materials, because of their excellent combination of high specific strength, light weight and general corrosion resistance. In fact, chemical wear resistance of aero-engine alloy provides a serious challenge for cutting tool material during the machining process. The reduction in ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Procedia CIRP
سال: 2013
ISSN: 2212-8271
DOI: 10.1016/j.procir.2013.06.132