Miniaturized bent slotted patch antenna over a reactive impedance surface substrate – ERRATUM
نویسندگان
چکیده
منابع مشابه
C0-axial Feed Rectangular Patch Antenna over High Impedance Surface
-In the field of wireless communication as the demand for small size systems are increasing, the compact size, low profile, light weight micro strip antennas are attracting the antenna designers attention. But these antennas have some drawbacks like narrow band width, low gain and surface waves. So many researches have proposed different techniques to enhance the band width. Now in present pape...
متن کاملDual Band Slotted Patch Antenna for On/Off-body Communication
Body Centric Wireless Communication (BCWC) has been topic of much research in recent years. In this manuscript, a novel low-cost microstrip patch antenna is designed for on-/off-body communication with a dual-band operation. The proposed structure exhibits a monopole-like radiation pattern at 2.45 GHz and a broadside radiation at 4.8 GHz, simultaneously. Lateral dimensions of 42 mm × 46 mm and ...
متن کاملDiamond Shaped Symmetrical Slotted Miniaturized Microstrip Patch Antenna for Wireless Applications
A reduced ground plane diamond shaped multiband microstrip slot antenna is proposed. The antenna is designed with two symmetrical slots to form the diamond shape and the patch is fed with a microstripline. The slots make the antenna to have multiple resonances to operate in the frequency bands of 2.15 GHz to 7.8 GHz with a peak gain of 6.09 dB at 6.83 GHz and above 2 dB in all operating bands a...
متن کاملA Miniaturized 878 MHz Slotted Meander Line Monopole Antenna
A slotted meander line printed monopole antenna for low frequency applications at 878 MHz is presented. The operating frequency of the conventional printed monopole antenna was greatly reduced by the presence of the slots and meander line which lead to the reduction of the antenna size. The size reduction up to 70% compared to the conventional reference antenna is achieved in this study. The an...
متن کاملMonopole Slotted Patch Antenna for Microwave Communication
A single layer monpole slotted patch antenna is thoroughly simulated in this paper. Resonant frequency has been reduced drastically by cutting three equal slots which are same hexagonal structure at the upper right, upper left, lower left corner and a circle at the center from the conventional microstrip patch antenna. It is shown that the simulated results are in acceptable agreement. More imp...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Microwave and Wireless Technologies
سال: 2015
ISSN: 1759-0787,1759-0795
DOI: 10.1017/s1759078715000501