MINIMIZING TEMPERATURE AND TOOL WEAR ON ROCK CUTTING WITH NEGATIVE RAKE ANGLE
نویسندگان
چکیده
منابع مشابه
the effect of tool rake angle and cutting speed on cutting force during broaching process by using finite element modeling
0
متن کاملInvestigation on Cutting Temperature and Tool-wear and Comparing Them with Fem Results
Finite element modeling (FEM) of machining is a widely applied way to get information about the phenomena occurring during the cutting process. However, the results have to be validated by real data collected by cutting experiments. We have realized a machining experiment focusing on temperature and tool-wear. The paper introduces some results and compares them with the FEM outcomes.
متن کاملCutting tool wear estimation for turning
The experimental investigation on cutting tool wear and a model for tool wear estimation is reported in this paper. The changes in the values of cutting forces, vibrations and acoustic emissions with cutting tool wear are recoded and analyzed. On the basis of experimental results a model is developed for tool wear estimation in turning operations using Adaptive Neuro fuzzy Inference system (ANF...
متن کاملInvestigating Flank Wear and Cutting Force on Hard Steels by CBN Cutting Tool by Turning
In this research work a series of tests were conducted in order to determine flank wear and cutting force FY on hard AISI 440 C martensitic stainless steel and SCM 440 alloy steels. The operating parameters are cutting speed, feed rate and a constant depth of cut to investigate the flank wear and cutting force. No cutting fluid was used during the turning process. The cutting tool used was CBN ...
متن کاملTool wear monitoring and selection of optimum cutting conditions with progressive tool wear effect and input uncertainties
One of the big challenges in machining is replacing the cutting tool at the right time. Carrying on the process with a dull tool may degrade the product quality. However, it may be unnecessary to change the cutting tool if it is still capable of continuing the cutting operation. Both of these cases could increase the production cost. Therefore, an effective tool conditionmonitoring systemmay re...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: MM Science Journal
سال: 2019
ISSN: 1803-1269,1805-0476
DOI: 10.17973/mmsj.2019_06_2019004