Mobile Robots Enhanced by microtubular Solid Oxide Fuel Cells (mSOFCs)

Steam Electrolysis Using a Microtubular Solid Oxide Fuel Cell

Reversible operation of a microtubular solid oxide fuel cell SOFC with high electrochemical efficiency is reported. These devices can ideally produce hydrogen from electricity and steam solid oxide electrolyser SOE and then use the stored hydrogen to generate electricity and heat SOFC , acting as a storage device for the electrical energy. A fuel-electrode-supported Ni–yttriastabilized zirconia...

Performance and Aging of Microtubular YSZ-based Solid Oxide Regenerative Fuel Cells

Fuel electrode supported microtubular solid oxide fuel cells (SOFC) fabricated at ICMA have been characterized in both solid oxide steam electrolyser (SOEC) and fuel cell modes. The cells consists of a fuel electrode supporting tube of Ni/YSZ with 40% porosity, 400 μm thickness, 2.4 mm diameter and 100-150 mm length, a 15 m thick YSZ electrolyte and a 50vol% LSM/YSZ composite air electrode of...

Modeling of Solid Oxide Fuel Cells

A comprehensive membrane-electrode assembly (MEA) model of Solid Oxide Fuel Cell (SOFC)s is developed to investigate the effect of various design and operating conditions on the cell performance and to examine the underlying mechanisms that govern their performance. We review and compare the current modeling methodologies, and develop an one-dimensional MEA model based on a comprehensive approa...

Modeling of Solid-Oxide Fuel Cells

This article presents a brief review on modeling philosophies of solid-oxide fuel cells (SOFCs) including an introduction to SOFC components and their functions. While a plethora of numerical models is available for SOFC modeling and simulation, this paper focuses on a general overview on mathematical model equations that represent the physico-chemical processes occurring in SOFCs and their bou...

Direct hydrocarbon solid oxide fuel cells.