Modal validation of a cantilever-plate bimorph actuator illustrating sensitivity to 3D characterisation
نویسندگان
چکیده
منابع مشابه
Simulation of a Buckled Cantilever Plate with Thermal Bimorph Actuators
INTRODUCTION: Micro Electro Mechanical Systems (MEMS) are fabricated with an in-plane fabrication technology. Out-of-plane structures can be designed to be assembled to provide thermal and electrical isolation from the substrate [1 -3]. These isolations can potentially improve the performance of a range of MEMS devices by decreasing any unwanted coupling effects or parasitic losses from the dev...
متن کاملModeling and modal analysis to oscillations of IPMC cantilever beam and simulating as an actuator
The purpose of this article is modal analysis of ionic polymer metal composite beams, then briefing the system to the unique parameters to help in up modeling of the actuator. In this paper at first using of Mathematical analysis and Closed form transfer function of cantilever beam dynamic response to the forces of different inputs (intensive and continuous) is calculated and for different type...
متن کاملPiezoelectric Bimorph Cantilever for Vibration-Producing-Hydrogen
A device composed of a piezoelectric bimorph cantilever and a water electrolysis device was fabricated to realize piezoelectrochemical hydrogen production. The obvious output of the hydrogen and oxygen through application of a mechanical vibration of ~0.07 N and ~46.2 Hz was observed. This method provides a cost-effective, recyclable, environment-friendly and simple way to directly split water ...
متن کاملA soft-polymer piezoelectric bimorph cantilever-actuated peristaltic micropump.
A peristaltic micropump was fabricated and characterized. The micropump was fabricated using soft lithography, and actuated using piezoelectric bimorph cantilevers. The micropump channel was formed by bonding two layers of PDMS, mixed at 5:1 and 30:1 ratios. The channel was fabricated in the 5:1 layer using replica molding (REM), where a very simple and inexpensive template was made by straddli...
متن کاملOn the electromechanics of a piezoelectric transducer using a bimorph cantilever undergoing asymmetric sensing and actuation
This paper presents an analytical, numerical and experimental study of an asymmetric piezoelectric actuator/sensor cantilever beam. The structure consists in a three-layered laminate with a piezoceramic acting as actuator, an elastic material layer and a second piezoceramic layer that can operate as a sensor or actuator. The coupled expansion-bending motion of the system is analytically resolve...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Electroceramics
سال: 2009
ISSN: 1385-3449,1573-8663
DOI: 10.1007/s10832-009-9587-6