Mode Shape-Based Damage Detection Method (MSDI): Experimental Validation
نویسندگان
چکیده
The main principle of vibration-based damage detection in structures is to interpret the changes dynamic properties structure as indicators damage. In this study, mode shape index (MSDI) method was used identify discrete damages plate-like structures. This based on difference between modified modal displacements undamaged and damaged state structure. order assess advantages limitations proposed algorithm, we performed experimental analysis a reinforced concrete (RC) plate under 10 different cases. MSDI values were calculated through considering single and/or multiple locations, levels damage, boundary conditions. results confirmed that can be detect existence estimate severity case
منابع مشابه
Research in Sensibility of Locating Damage Methods Based on Mode Shape to Damage Intensity
Structural health monitoring and damage detection is one of the most important subjects for mechanic and aerospace engineers. Structural fault can cause uncompensated problems for both human and environment. There are several methods for solving this problem, but the most useful methods are those which focuse on structural change in the vibrational properties. This paper presents a feasibility ...
متن کاملTWO-STAGE METHOD FOR DAMAGE LOCALIZATION AND QUANTIFICATION IN HIGH-RISE SHEAR FRAMES BASED ON THE FIRST MODE SHAPE SLOPE
In this paper, a two-stage method for damage detection and estimation in tall shear frames is presented. This method is based on the first mode shape of a shear frame. We demonstrate that the first mode shape slope is very sensitive to the story stiffness. Thus, at the first stage, by using the grey system theory on the first mode shape slope, damage locations are identified in shear frames. Da...
متن کاملDamage Detection of Axially Loaded Beam: A Frequency-Based Method
The present study utilizes an analytical method to formulate the three lowest modal frequencies of axially-loaded notched beam through both crack location and load level in a specific format that can be used in existing frequency-based crack-identification methods. The proposed formula provides a basis to shift into two states, one with axial loading and the other without any loading whatsoever...
متن کاملExperimental Detection of Composite Delamination Damage based on Ultrasonic Infrared Thermography
An experimental setup is designed to detect composite delamination damage based on ultrasonic infrared thermography. The ultrasonic infrared thermography system is composed by ultrasonic excitation system, infrared thermal imager and data acquisition system and two damaged composite plate specimens are produced in the experiment. The image processing methods including thresholding, filters, edg...
متن کاملdamage detection of axially loaded beam: a frequency-based method
the present study utilizes an analytical method to formulate the three lowest modal frequencies of axially-loaded notched beam through both crack location and load level in a specific format that can be used in existing frequency-based crack-identification methods. the proposed formula provides a basis to shift into two states, one with axial loading and the other without any loading whatsoever...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Applied sciences
سال: 2021
ISSN: ['2076-3417']
DOI: https://doi.org/10.3390/app11104589